[PATCH] arm64: defconfig: Change CONFIG_SM_TCSRCC_8750 from m to y
Taniya Das
taniya.das at oss.qualcomm.com
Tue Oct 21 02:12:25 PDT 2025
On 10/18/2025 3:11 AM, Bjorn Andersson wrote:
> On Fri, Oct 17, 2025 at 11:19:51AM +0530, Taniya Das wrote:
>>
>>
>> On 10/17/2025 10:51 AM, Krzysztof Kozlowski wrote:
>>> On 17/10/2025 07:16, Taniya Das wrote:
>>>>
>>>>
>>>> On 10/17/2025 10:00 AM, Krzysztof Kozlowski wrote:
>>>>> On 16/10/2025 20:53, Taniya Das wrote:
>>>>>> The TCSR clock controller is required during boot to provide the ref
>>>>>> clocks to the UFS controller. Setting CONFIG_SM_TCSRCC_8750 to y ensures
>>>>>> the UFS driver successfully probe and initialize the device.
>>>>>>
>>>>>> Without this change, the UFS subsystem fails to mount as a usable file
>>>>>> system during boot.
>>>>>
>>>>>
>>>>> That's not what I observed. UFS works fine, especially that it is a
>>>>> module, so no, this is not a desired change and explanation is not only
>>>>> insufficient but actually incorrect.
>>>>>
>>>>
>>>> Krzysztof, on Pakala MTP we are observing the below issue and it
>>>> requires the module of tscrcc to be loaded explicitly. This patch also
>>>> aligns to how it is on all other targets.
>>>>
>>>> /soc at 0/phy at 1d80000: Failed to get clk index: 2 ret: -517
>>>> [ 10.496570] ufshcd-qcom 1d84000.ufs: freq-table-hz property not specified
>>>> [ 10.503660] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
>>>> find vdd-hba-supply regulator, assuming enabled
>>>> [ 10.514548] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
>>>> find vccq2-supply regulator, assuming enabled
>>>> [ 10.565955] platform 1d80000.phy: deferred probe pending: (reason
>>>> unknown)
>>>> [ 10.573078] platform 1d84000.ufs: deferred probe pending:
>>>> ufshcd-qcom: ufshcd_pltfrm_init() failed
>>>>
>>>
>>>
>>> I don't and I am testing regularly, so I assume you have incorrect
>>> config. Maybe I have incorrect one (which works), but then commit msg is
>>> incomplete - you must explain the bug and provide proof that this is the
>>> correct fix for it.
>>>
>>
>> We have tried booting up recently and and that is what we observed. The
>> patch from 'm' to 'y' helps the UFS probe is successful and the rootfs
>> is picked from ufs partitions. I will add these fail & success log
>> snippets in the commit text.
>
> Please don't, there's nothing useful in either log, so dumping them in
> the git history will serve no purpose.
>
Sure, Bjorn, will let the team get the correct fix.
> Regards,
> Bjorn
>
>>
>> [ 0.000000] Machine model: Qualcomm Technologies, Inc. SM8750 MTP
>> ....
>> [ 3.133373] ufshcd-qcom 1d84000.ufs: freq-table-hz property not specified
>> [ 3.144480] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
>> find vdd-hba-supply regulator, assuming enabled
>> [ 3.144585] ufshcd-qcom 1d84000.ufs: ufshcd_populate_vreg: Unable to
>> find vccq2-supply regulator, assuming enabled
>> [ 3.227770] ufshcd-qcom 1d84000.ufs: Resource ufs_mem not provided
>> [ 3.238319] ufshcd-qcom 1d84000.ufs: MCQ mode is disabled, err=-19
>> [ 3.244707] scsi host0: ufshcd
>> [ 3.255170] scsi 0:0:0:49488: Well-known LUN KIOXIA
>> THGJFLT2E46BATPB 0100 PQ: 0 ANSI: 6
>> [ 3.272001] scsi 0:0:0:49476: Well-known LUN KIOXIA
>> THGJFLT2E46BATPB 0100 PQ: 0 ANSI: 6
>> [ 3.287011] scsi 0:0:0:49456: Well-known LUN KIOXIA
>> THGJFLT2E46BATPB 0100 PQ: 0 ANSI: 6
>> [ 3.304264] scsi 0:0:0:0: Direct-Access KIOXIA THGJFLT2E46BATPB
>> 0100 PQ: 0 ANSI: 6
>> [ 3.331545] sd 0:0:0:0: [sda] 121774080 4096-byte logical blocks:
>> (499 GB/465 GiB)
>>
>>
>> Thanks,
>> Taniya.
>>
--
Thanks,
Taniya Das
More information about the linux-arm-kernel
mailing list