[PATCH v2 2/9] ARM: dts: imx6ull-dhcom-pdk2: rename power-supply to vcc-supply for touchscreen

[Frank Li]

Rename power-supply to vcc-supply for touchscreen to fix below CHECK_DTB
warnings:
  arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dtb: touchscreen at 38 (edt,edt-ft5406): Unevaluated properties are not allowed ('power-supply' was unexpected)

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
index b29713831a74489e8cc0e651c18a40d85f9f9113..04e570d76e42cd67a38e0f3b2301598f712e6bd4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts
@@ -199,7 +199,7 @@ touchscreen at 38 {
 		reg = <0x38>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		power-supply = <&reg_panel_3v3>;
+		vcc-supply = <&reg_panel_3v3>;
 	};
 };
 

-- 
2.34.1