[PATCH v7 3/3] arm64: dts: imx91: Add thermal-sensor and thermal-zone support
Frank Li
Frank.Li at nxp.com
Mon Oct 20 12:00:42 PDT 2025
Add thermal-sensor and thermal-zone support.
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
changes in v7
- new patch
---
arch/arm64/boot/dts/freescale/imx91.dtsi | 58 ++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
index 4d8300b2a7bca33bd0613db9e79d2fba6b40c052..f075592bfc01f1eb94d2a2bd8eea907cc2aed090 100644
--- a/arch/arm64/boot/dts/freescale/imx91.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
@@ -6,6 +6,54 @@
#include "imx91-pinfunc.h"
#include "imx91_93_common.dtsi"
+/{
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu-crit {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
+
+&aips1 {
+ tmu: thermal-sensor at 44482000 {
+ compatible = "fsl,imx91-tmu";
+ reg = <0x44482000 0x1000>;
+ #thermal-sensor-cells = <0>;
+ clocks = <&clk IMX93_CLK_TMC_GATE>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "thr1", "thr2", "ready";
+ nvmem-cells = <&tmu_trim1>, <&tmu_trim2>;
+ nvmem-cell-names = "trim1", "trim2";
+ };
+};
+
&clk {
compatible = "fsl,imx91-ccm";
};
@@ -69,3 +117,13 @@ &media_blk_ctrl {
clock-names = "apb", "axi", "nic", "disp", "cam",
"lcdif", "isi", "csi";
};
+
+&ocotp {
+ tmu_trim1: tmu-trim at a0 {
+ reg = <0xa0 0x4>;
+ };
+
+ tmu_trim2: tmu-trim at a4 {
+ reg = <0xa4 0x4>;
+ };
+};
--
2.34.1
More information about the linux-arm-kernel
mailing list