[PATCH 06/11] clk: sunxi-ng: sun55i-a523-ccu: Lower audio0 pll minimum rate

[Jernej Škrabec]

Dne ponedeljek, 20. oktober 2025 ob 19:10:52 Srednjeevropski poletni čas je Chen-Yu Tsai napisal(a):
> While the user manual states that the PLL's rate should be between 180
> MHz and 3 GHz in the register defninition section, it also says the
> actual operating frequency is 22.5792*4 MHz in the PLL features table.
> 
> 22.5792*4 MHz is one of the actual clock rates that we want and is
> is available in the SDM table. Lower the minimum clock rate to 90 MHz
> so that both rates in the SDM table can be used.

So factor of 2 could be missed somewhere?

> 
> Fixes: 7cae1e2b5544 ("clk: sunxi-ng: Add support for the A523/T527 CCU PLLs")
> Signed-off-by: Chen-Yu Tsai <wens at kernel.org>

Reviewed-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej

> ---
>  drivers/clk/sunxi-ng/ccu-sun55i-a523.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> index acb532f8361b..20dad06b37ca 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523.c
> @@ -300,7 +300,7 @@ static struct ccu_nm pll_audio0_4x_clk = {
>  	.m		= _SUNXI_CCU_DIV(16, 6),
>  	.sdm		= _SUNXI_CCU_SDM(pll_audio0_sdm_table, BIT(24),
>  					 0x178, BIT(31)),
> -	.min_rate	= 180000000U,
> +	.min_rate	= 90000000U,
>  	.max_rate	= 3000000000U,
>  	.common		= {
>  		.reg		= 0x078,
>