[PATCH v2 1/1] drm: lcdif: Use dev_err_probe()

[Frank Li]

On Mon, Oct 20, 2025 at 11:58:45AM +0200, Alexander Stein wrote:
> Use dev_err_probe() to add a reason for deferred probe. This can
> especially happen on lcdif3 which uses hdmi_tx_phy for 'pix' clock
>
> Reviewed-by: Liu Ying <victor.liu at nxp.com>
> Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> ---
> Changes in v2:
> * Collected Liu's and Marcos' R-b

Reviewed-by: Frank Li <Frank.Li at nxp.com>

>
>  drivers/gpu/drm/mxsfb/lcdif_drv.c | 8 +++++---
>  1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/lcdif_drv.c b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> index fcb2a7517377e..47da1d9336b90 100644
> --- a/drivers/gpu/drm/mxsfb/lcdif_drv.c
> +++ b/drivers/gpu/drm/mxsfb/lcdif_drv.c
> @@ -149,15 +149,17 @@ static int lcdif_load(struct drm_device *drm)
>
>  	lcdif->clk = devm_clk_get(drm->dev, "pix");
>  	if (IS_ERR(lcdif->clk))
> -		return PTR_ERR(lcdif->clk);
> +		return dev_err_probe(drm->dev, PTR_ERR(lcdif->clk), "Failed to get pix clock\n");
>
>  	lcdif->clk_axi = devm_clk_get(drm->dev, "axi");
>  	if (IS_ERR(lcdif->clk_axi))
> -		return PTR_ERR(lcdif->clk_axi);
> +		return dev_err_probe(drm->dev, PTR_ERR(lcdif->clk_axi),
> +				     "Failed to get axi clock\n");
>
>  	lcdif->clk_disp_axi = devm_clk_get(drm->dev, "disp_axi");
>  	if (IS_ERR(lcdif->clk_disp_axi))
> -		return PTR_ERR(lcdif->clk_disp_axi);
> +		return dev_err_probe(drm->dev, PTR_ERR(lcdif->clk_disp_axi),
> +				     "Failed to get disp_axi clock\n");
>
>  	platform_set_drvdata(pdev, drm);
>
> --
> 2.43.0
>