[PATCH v2 2/5] clk: samsung: clk-pll: Add support for pll_141xx

[Ivaylo Ivanov]

The PLL is similar to pll_35xx, with the exception of a different
Locktime - 150 instead of 270, as with pll_142xx.

When defining a PLL, the "con" parameter should be set to CON0
register, like this:

PLL(pll_141xx, CLK_FOUT_SHARED0_PLL, "fout_shared0_pll", "oscclk",
    PLL_LOCKTIME_PLL_SHARED0, PLL_CON0_PLL_SHARED0,
    pll_shared0_rate_table),

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1 at gmail.com>
---
Changes since V2:
- rebase on next and drop the unnecessary new line
---
 drivers/clk/samsung/clk-pll.c | 4 +++-
 drivers/clk/samsung/clk-pll.h | 1 +
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index 7bea7be1d..4700eadad 100644
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -278,7 +278,8 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	}
 
 	/* Set PLL lock time. */
-	if (pll->type == pll_142xx || pll->type == pll_1017x)
+	if (pll->type == pll_142xx || pll->type == pll_1017x ||
+	    pll->type == pll_141xx)
 		writel_relaxed(rate->pdiv * PLL142XX_LOCK_FACTOR,
 			pll->lock_reg);
 	else
@@ -1497,6 +1498,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 	case pll_1451x:
 	case pll_1452x:
 	case pll_142xx:
+	case pll_141xx:
 	case pll_1017x:
 		pll->enable_offs = PLL35XX_ENABLE_SHIFT;
 		pll->lock_offs = PLL35XX_LOCK_STAT_SHIFT;
diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index 6c8bb7f26..3c7575cde 100644
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -51,6 +51,7 @@ enum samsung_pll_type {
 	pll_4311,
 	pll_1017x,
 	pll_1031x,
+	pll_141xx,
 };
 
 #define PLL_RATE(_fin, _m, _p, _s, _k, _ks) \
-- 
2.43.0