[PATCH 2/3] arm64: dts: renesas: r8a77960: Add GX6250 GPU node

[Marek Vasut]

On 10/15/25 12:55 PM, Matt Coster wrote:

Hello Matt,

>>> I see this pattern used throughout
>>> the Renesas dts, but I'm just thinking how this will interact with the
>>> powervr driver. The reset line is optional since some hardware
>>> integrations manage it for us during the power-up/down sequences, which
>>> appears to be the case here with the MSTP control (from my brief dig
>>> through the Renesas TRM).
>>
>> As far as I can tell, the pvr_power.c toggles the IP reset after the
>> IP clock were already enabled, so the IP should be correctly reset.
>> What kind of problem do you expect ?
> 
> I think I'm just being paranoid about the weirdness (to me at least) of
> having one device be treated as both clock and reset line. Assuming this
> is tested as working, I'm okay with it, especially as it seems to be the
> norm for Renesas.

The combined clock/reset IP is not limited to renesas SoCs, there are 
other SoCs which do the same thing (Allwinner "ccu", Marvell PXA 
"soc_clocks" , nVidia Tegra "car", Qualcomm "gcc", Rockchip "cru", to 
name a few). Usually the registers which control clock and resets are 
shared in the same IP, but they control different (possibly related) 
signals in the SoC.

>>> Related, see my comments on the bindings patch (P1/3) about how clocks
>>> are wired up in this SoC.
>> I tried to reply to that one, hopefully it makes some sense.
> 
> Looks like we've figured it out there, thanks for your comments!

Likewise, thank you for sharing the clocking details.

-- 
Best regards,
Marek Vasut