[PATCH net-next 08/14] net: stmmac: move reverse-"pcs" mode setup to stmmac_check_pcs_mode()

[Russell King (Oracle)]

The broken reverse-mode, selected by snps,ps-speed, is configured when
the platform provides a valid port speed and a PCS is being used.

Both these remain constant after the driver has probed, so the software
state doesn't need to be re-initialised each time stmmac_hw_setup() is
called (which is called at open and resume time.)

Move the software setup of reverse-mode to stmmac_check_pcs_mode()
which is called from the driver probe function.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 26 +++++++++----------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d440b1c2b7ff..013a2f3684c7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1091,6 +1091,19 @@ static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
 		netdev_dbg(priv->dev, "PCS SGMII support enabled\n");
 		priv->hw->pcs = STMMAC_PCS_SGMII;
 	}
+
+	/* PS and related bits will be programmed according to the speed */
+	if (priv->hw->pcs) {
+		int speed = priv->plat->mac_port_sel_speed;
+
+		if ((speed == SPEED_10) || (speed == SPEED_100) ||
+		    (speed == SPEED_1000)) {
+			priv->hw->ps = speed;
+		} else {
+			dev_warn(priv->device, "invalid port speed\n");
+			priv->hw->ps = 0;
+		}
+	}
 }
 
 /**
@@ -3435,19 +3448,6 @@ static int stmmac_hw_setup(struct net_device *dev)
 	stmmac_set_umac_addr(priv, priv->hw, dev->dev_addr, 0);
 	phylink_rx_clk_stop_unblock(priv->phylink);
 
-	/* PS and related bits will be programmed according to the speed */
-	if (priv->hw->pcs) {
-		int speed = priv->plat->mac_port_sel_speed;
-
-		if ((speed == SPEED_10) || (speed == SPEED_100) ||
-		    (speed == SPEED_1000)) {
-			priv->hw->ps = speed;
-		} else {
-			dev_warn(priv->device, "invalid port speed\n");
-			priv->hw->ps = 0;
-		}
-	}
-
 	/* Initialize the MAC Core */
 	stmmac_core_init(priv, priv->hw, dev);
 
-- 
2.47.3