[PATCH v4 5/5] arm64: dts: ti: k3-j721s2: disable "mcu_cpsw" in SoC file and enable in board files

[Siddharth Vadapalli]

Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-j721s2-mcu-wakeup.dtsi" and enable it in the board
files:
a) k3-am68-phyboard-izar.dts
b) k3-am68-sk-base-board.dts
c) k3-j721s2-common-proc-board.dts

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---

v3 of this patch is at:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/20251014125349.3408784-6-s-vadapalli@ti.com/
Changes since v3:
- Rebased patch on next-20251014.
- Based on feedback from Dominik Haller <d.haller at phytec.de> at:
  https://lore.kernel.org/r/df6acbfe5d30956ed66e2768fa595c36d2ebe98a.camel@phytec.de/
  cpsw has been enabled in k3-am68-phyboard-izar.dts

 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts       | 1 +
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts       | 1 +
 arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 1 +
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi       | 2 ++
 4 files changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
index 41c8f8526e15..381880cf9d79 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
@@ -422,6 +422,7 @@ &main_uart8 {
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>;
+	status = "okay";
 };
 
 &mcu_i2c1 {
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 75a107456ce1..e44542b1584c 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -692,6 +692,7 @@ &main_sdhci1 {
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 9e43dcff8ef2..3740596576c0 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -457,6 +457,7 @@ &main_sdhci1 {
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	status = "okay";
 };
 
 &davinci_mdio {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 837097751c18..2a7f9c519735 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -552,6 +552,8 @@ mcu_cpsw: ethernet at 46000000 {
 			    "tx4", "tx5", "tx6", "tx7",
 			    "rx";
 
+		status = "disabled";
+
 		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.51.0