[PATCH v2] arm64: dts: mediatek: mt8188-geralt: Enable first SCP core

Chen-Yu Tsai wenst at chromium.org
Wed Oct 15 00:31:22 PDT 2025


On Tue, Oct 14, 2025 at 9:27 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno at collabora.com> wrote:
>
> Il 14/08/25 11:25, Chen-Yu Tsai ha scritto:
> > The first SCP core is used to drive the video decoder and encoders.
> >
> > Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> > ---
> > Changes since v1:
> > - Added SCP vreq pin
> > ---
> >   .../boot/dts/mediatek/mt8188-geralt.dtsi      | 25 +++++++++++++++++++
> >   1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
> > index c5254ae0bb99..7fedbacdac44 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
> > @@ -164,6 +164,12 @@ reserved_memory: reserved-memory {
> >               #size-cells = <2>;
> >               ranges;
> >
> > +             scp_mem_reserved: memory at 50000000 {
> > +                     compatible = "shared-dma-pool";
> > +                     reg = <0 0x50000000 0 0x800000>;
> > +                     no-map;
> > +             };
> > +
> >               apu_mem: memory at 55000000 {
> >                       compatible = "shared-dma-pool";
> >                       reg = <0 0x55000000 0 0x1400000>;
> > @@ -1077,6 +1083,13 @@ pins-bus {
> >               };
> >       };
> >
> > +     scp_pins: scp-pins {
> > +             pins-scp-vreq {
> > +                     pinmux = <PINMUX_GPIO98__FUNC_O_SCP_VREQ_VAO>;
> > +                     bias-disable;
> > +             };
> > +     };
> > +
> >       spi0_pins: spi0-pins {
> >               pins-bus {
> >                       pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
> > @@ -1146,6 +1159,18 @@ &postmask0_out {
> >       remote-endpoint = <&dither0_in>;
> >   };
> >
> > +&scp_cluster {
> > +     status = "okay";
> > +};
> > +
> > +&scp_c0 {
> > +     pinctrl-names = "default";
> > +     pinctrl-0 = <&scp_pins>;
> > +     firmware-name = "mediatek/mt8188/scp.img";
>
> After a (very brief) discussion with Arnd last time, turns out we decided to avoid
> using the firmware-name property, including for mtk-scp.
>
> Please resend without firmware-name.
>
> P.S.: there's a patch to construct the firmware name from compatible...
> https://lore.kernel.org/r/20250911140043.190801-1-angelogioacchino.delregno@collabora.com

I'm aware of the patch, but did that get merged? If not then this would
cause it to default to just /lib/firmware/scp.img?

ChenYu

> Cheers,
> Angelo
>
> > +     memory-region = <&scp_mem_reserved>;
> > +     status = "okay";
> > +};
> > +
> >   &sound {
> >       pinctrl-names = "aud_etdm_hp_on", "aud_etdm_hp_off",
> >                       "aud_etdm_spk_on", "aud_etdm_spk_off",
>
>



More information about the linux-arm-kernel mailing list