[PATCH v4 0/2] Mainline Protonic PRT8ML board

[Jonas Rebmann]

This series adds the Protonic PRT8ML device tree as well as some minor
corrections to the devicetree bindings used.

Signed-off-by: Jonas Rebmann <jre at pengutronix.de>
---
Changes in v4:
- Dropped "dt-bindings: net: dsa: nxp,sja1105: Add reset-gpios
  property", applied to netdev/net-next.git (Thanks, Jakub)
- Comment on deleted OPP and deleted dma, correct tps65987ddh node names
  (Thanks, Peng)
- Link to v3: https://lore.kernel.org/r/20250924-imx8mp-prt8ml-v3-0-f498d7f71a94@pengutronix.de

Changes in v3:
- Add comment on the intentional limitation to 100Mbps RGMII
- Link to v2: https://lore.kernel.org/r/20250918-imx8mp-prt8ml-v2-0-3d84b4fe53de@pengutronix.de

Changes in v2:
- Dropped "ASoC: dt-bindings: asahi-kasei,ak4458: Reference common DAI
  properties", applied to broonie/sound for-next (Thanks, Mark)
- Updated description of the reset-gpios property in sja1105 binding to
  address the issues of connecting this pin to GPIO (Thanks, Vladimir)
- Added the fec, switch and phy for RJ45 onboard ethernet after
  successful testing
- Consistently use interrupts-extended
- Link to v1: https://lore.kernel.org/r/20250910-imx8mp-prt8ml-v1-0-fd04aed15670@pengutronix.de

---
Jonas Rebmann (2):
      dt-bindings: arm: fsl: Add Protonic PRT8ML
      arm64: dts: add Protonic PRT8ML board

 Documentation/devicetree/bindings/arm/fsl.yaml  |   1 +
 arch/arm64/boot/dts/freescale/Makefile          |   1 +
 arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts | 504 ++++++++++++++++++++++++
 3 files changed, 506 insertions(+)
---
base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
change-id: 20250701-imx8mp-prt8ml-01be34684659

Best regards,
--  
Jonas Rebmann <jre at pengutronix.de>