[PATCH v1] arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred

[João Paulo Gonçalves]

From: João Paulo Gonçalves <joao.goncalves at toradex.com>

The gpio0_mipi_csi DT nodes are enabled by default, but they are
dependent on the irqsteer_csi nodes, which are not enabled. This causes
the gpio0_mipi_csi GPIOs to be probe deferred. Since these GPIOs can be
used independently of the CSI controller, enable irqsteer_csi by default
too to prevent them from being deferred and to ensure they work out of
the box.

Fixes: 2217f8243714 ("arm64: dts: imx8: add capture controller for i.MX8's img subsystem")
Signed-off-by: João Paulo Gonçalves <joao.goncalves at toradex.com>
---
 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index 2cf0f7208350a416d77b11140279d2f66f41498f..a72b2f1c4a1b2ef26196c810b33ecfdebdbc1675 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -67,7 +67,6 @@ irqsteer_csi0: irqsteer at 58220000 {
 		power-domains = <&pd IMX_SC_R_CSI_0>;
 		fsl,channel = <0>;
 		fsl,num-irqs = <32>;
-		status = "disabled";
 	};
 
 	gpio0_mipi_csi0: gpio at 58222000 {
@@ -144,7 +143,6 @@ irqsteer_csi1: irqsteer at 58240000 {
 		power-domains = <&pd IMX_SC_R_CSI_1>;
 		fsl,channel = <0>;
 		fsl,num-irqs = <32>;
-		status = "disabled";
 	};
 
 	gpio0_mipi_csi1: gpio at 58242000 {

---
base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
change-id: 20251009-imx8-gpio-csi-deferred-probe-eef6c56a35aa

Best regards,
-- 
João Paulo Gonçalves <joao.goncalves at toradex.com>