[PATCH v2 14/15] dt-bindings: mtd: sunxi: Add H616 compatible

[Richard GENOUD]

Le 13/10/2025 à 21:44, Conor Dooley a écrit :
> On Mon, Oct 13, 2025 at 05:26:44PM +0200, Richard Genoud wrote:
>> The H616 NAND controller is quite different from the A10 and A23 ones,
>> some registers offset changed, and some new one are introduced.
>> Also, the DMA handling is different (it uses chained descriptors)
>>
>> So, introduce a new compatible to represent this version of the IP.
>>
>> Signed-off-by: Richard Genoud <richard.genoud at bootlin.com>
>> ---
>>   .../mtd/allwinner,sun4i-a10-nand.yaml         | 57 ++++++++++++++++---
>>   1 file changed, 48 insertions(+), 9 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
>> index 054b6b8bf9b9..4b82de9fae17 100644
>> --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
>> @@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>>   
>>   title: Allwinner A10 NAND Controller
>>   
>> -allOf:
>> -  - $ref: nand-controller.yaml
>> -
>>   maintainers:
>>     - Chen-Yu Tsai <wens at csie.org>
>>     - Maxime Ripard <mripard at kernel.org>
>> @@ -18,6 +15,8 @@ properties:
>>       enum:
>>         - allwinner,sun4i-a10-nand
>>         - allwinner,sun8i-a23-nand-controller
>> +      - allwinner,sun50i-h616-nand-controller
>> +
>>     reg:
>>       maxItems: 1
>>   
>> @@ -25,14 +24,12 @@ properties:
>>       maxItems: 1
>>   
>>     clocks:
>> -    items:
>> -      - description: Bus Clock
>> -      - description: Module Clock
>> +    minItems: 2
>> +    maxItems: 4
>>   
>>     clock-names:
>> -    items:
>> -      - const: ahb
>> -      - const: mod
>> +    minItems: 2
>> +    maxItems: 4
> 
> The clock descriptions and names should remain out here, with your new
> min/max constraints, since they're identical at indices 0 and 1 to for
> both types of device. The if/then should only set the min to 4 for the
> new device and the max to 2 for the existing ones.

Indeed.

Thanks!

> 
> Cheers,
> Conor.
> 
> pw-bot: changes-requested
> 
>>   
>>     resets:
>>       maxItems: 1
>> @@ -85,6 +82,48 @@ required:
>>   
>>   unevaluatedProperties: false
>>   
>> +allOf:
>> +  - $ref: nand-controller.yaml
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - allwinner,sun4i-a10-nand
>> +              - allwinner,sun8i-a23-nand-controller
>> +    then:
>> +      properties:
>> +        clocks:
>> +          items:
>> +            - description: Bus Clock
>> +            - description: Module Clock
>> +        clock-names:
>> +          items:
>> +            - const: ahb
>> +            - const: mod
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - allwinner,sun50i-h616-nand-controller
>> +    then:
>> +      properties:
>> +        clocks:
>> +          items:
>> +            - description: Bus Clock
>> +            - description: Module Clock
>> +            - description: ECC Clock
>> +            - description: MBus Clock
>> +        clock-names:
>> +          items:
>> +            - const: ahb
>> +            - const: mod
>> +            - const: ecc
>> +            - const: mbus
>> +
>>   examples:
>>     - |
>>       #include <dt-bindings/interrupt-controller/arm-gic.h>


-- 
Richard Genoud, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com