[PATCH 4/4] ARM: dts: qcom: msm8974pro-htc-m8: add touchscreen

[Alexandre Messier]

On 2025-10-07 06:04, Konrad Dybcio wrote:
> On 10/7/25 7:55 AM, Alexandre Messier via B4 Relay wrote:
>> From: Alexandre Messier <alex at me.ssier.org>
>>
>> Add the touchscreen device node for the HTC One (M8).
>>
>> Signed-off-by: Alexandre Messier <alex at me.ssier.org>
>> ---
>>  arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 36 +++++++++++++++++++++++
>>  1 file changed, 36 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
>> index 36eb42f0f3d9..040a256f9465 100644
>> --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
>> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts
>> @@ -65,6 +65,35 @@ vreg_vph_pwr: vreg-vph-pwr {
>>  	};
>>  };
>>  
>> +&blsp1_i2c2 {
>> +	clock-frequency = <384000>;
> 
> This is not a valid I2C frequency
> 
> You're looking for 100/400/1000 kHz

Hello Konrad,

This frequency value is used in the vendor kernel [1], hence why I used it.

I did a test at 400 kHz, and the I2C devices (touchscreen here, and NFC in the
other patch) are still detected, with basic functions still working.

Let me know if I should still update to use 400 kHz. I would prefer to keep
the value from the vendor kernel (and in that case, I will update the commit
message to add that information).

Thanks

Alex

[1] https://github.com/LineageOS/android_kernel_htc_msm8974/blob/lineage-18.1/arch/arm/boot/dts/msm8974.dtsi#L970

> 
> Konrad
> 
>