[PATCH 16/16] media: rockchip: rga: add rga3 support

[Krzysztof Kozlowski]

On 07/10/2025 17:32, Sven Püschel wrote:
> Add support for the RGA3 unit contained in the RK3588.
> 
> Only a basic feature set consisting of scaling and color conversion is
> implemented. Advanced features like rotation and cropping will just be
> ignored. Also the BT601F color space conversion is currently hard coded.
> 
> The register address defines were copied from the
> vendor Rockchip kernel sources and slightly adjusted to not start at 0
> again for the cmd registers.
> 
> Signed-off-by: Sven Püschel <s.pueschel at pengutronix.de>
> ---
>  drivers/media/platform/rockchip/rga/Makefile  |   2 +-
>  drivers/media/platform/rockchip/rga/rga.c     |   4 +
>  drivers/media/platform/rockchip/rga/rga.h     |   2 +-
>  drivers/media/platform/rockchip/rga/rga3-hw.c | 490 ++++++++++++++++++++++++++
>  drivers/media/platform/rockchip/rga/rga3-hw.h | 186 ++++++++++
>  5 files changed, 682 insertions(+), 2 deletions(-)

Your order of patches is a mess. DTS cannot be in the middle. In fact,
DTS should not be even in this patchset, because you are targeting media.

Best regards,
Krzysztof