[PATCH v3 0/2] TQ-Systems TQMa62xx SoM and MBa62xx board

[Matthias Schiffer]

This adds Device Trees for out AM62x-based SoM TQMa62xx and its
reference carrier board MBa62xx.

Not yet included are overlays to enable LVDS display output and MIPI-CSI
camera input.

Changes in v3:
- Rebased onto ti-k3-dt-for-v6.18
- 3 of the 5 patches in v2 have been applied already and are dropped
- Include k3-am62-ti-ipc-firmware.dtsi, drop now redundant configuration
- Change node name for MCU reserved memory to 'memory'
- Use rgmii-id PHY mode
- Drop now redundant ti,rx-internal-delay
- Update simple-audio-card,name to match other TQ SOMs with compatible
  configuration
- Reference dss_pins in dss node (actual display support will be added
  in a follow-up patch series)
- Consistently use GPIO_ACTIVE_HIGH define
- Drop unneeded usb0 quirk flags
- Add boot phase tags

Changes in v2:
- Collected acks and reviews
- Rebased onto v6.13-rc1

Matthias Schiffer (2):
  dt-bindings: arm: ti: Add compatible for AM625-based TQMa62xx SOM
    family and carrier board
  arm64: dts: ti: Add TQ-Systems TQMa62xx SoM and MBa62xx carrier board
    Device Trees

 .../devicetree/bindings/arm/ti/k3.yaml        |   7 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts | 928 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi | 319 ++++++
 4 files changed, 1255 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi

-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/