[PATCH v2 1/5] dt-bindings: display: rk3588-dw-hdmi-qp: Add tmds-enable-gpios property

[Laurent Pinchart]

From: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>

Add an optional property to RK3588 HDMI TX Controller binding describing
a GPIO line to be asserted when operating in HDMI 1.4/2.0 TMDS mode and
deasserted for HDMI 2.1 FRL.

This is used to control an external level shifter for HDMI data lines.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 .../display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml   | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
index 96b4b088eebe..eec0d40c91ea 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
@@ -113,6 +113,13 @@ properties:
     description:
       Additional HDMI QP related data is accessed through VO GRF regs.
 
+  tmds-enable-gpios:
+    description:
+      Optional GPIO line to be asserted when operating in HDMI 1.4/2.0
+      TMDS mode and deasserted for HDMI 2.1 FRL. It can be used to control
+      an external level shifter for HDMI data lines.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -132,8 +139,10 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
     #include <dt-bindings/power/rk3588-power.h>
     #include <dt-bindings/reset/rockchip,rk3588-cru.h>
 
@@ -164,6 +173,7 @@ examples:
         rockchip,grf = <&sys_grf>;
         rockchip,vo-grf = <&vo1_grf>;
         #sound-dai-cells = <0>;
+        tmds-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
 
         ports {
           #address-cells = <1>;
-- 
Regards,

Laurent Pinchart