[Upstream] [PATCH v2 1/2] arm64: dts: ti: k3-am62-phycore-som: Enable cpsw_mac_syscon in U-Boot

[Wadim Egorov]

On 11/24/25 11:08 AM, Daniel Schultz wrote:
> Add the "bootph-all" property to cpsw_mac_syscon.
> 
> This fuse region contains the internal MAC address. Without this
> syscon node enabled, this interface will get a random MAC during
> network boot. This is problematic because the AM62x network
> boot is using BOOTP protocol for some binaries and this protocol
> does not support dynamic lease expiration. Therefore, the DHCP
> server can run out of free IP addresses.
> 
> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
> Changes in v2:
>    Moved changes from k2-am62-main.dsti to k3-am62-phycore-som.dtsi
> 
>   arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> index eeca643fedbe..beeac481e683 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> @@ -219,6 +219,10 @@ &cpsw_port1 {
>   	bootph-all;
>   };
>   
> +&cpsw_mac_syscon {
> +	bootph-all;
> +};


> +
>   &cpsw3g_mdio {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&main_mdio1_pins_default>;