[EXT] Re: [PATCH 6/6] spi: imx: enable DMA mode for target operation

[Carlos Song]

> -----Original Message-----
> From: Marc Kleine-Budde <mkl at pengutronix.de>
> Sent: Wednesday, November 26, 2025 8:18 PM
> To: Carlos Song <carlos.song at nxp.com>
> Cc: broonie at kernel.org; Frank Li <frank.li at nxp.com>; hawnguo at kernel.org;
> s.hauer at pengutronix.de; kernel at pengutronix.de; festevam at gmail.com;
> linux-spi at vger.kernel.org; imx at lists.linux.dev;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
> Subject: [EXT] Re: [PATCH 6/6] spi: imx: enable DMA mode for target operation
> 
> On 25.11.2025 18:06:18, Carlos Song wrote:
> > @@ -1895,10 +1920,16 @@ static int spi_imx_dma_package_transfer(struct
> > spi_imx_data *spi_imx,  static int spi_imx_dma_transfer(struct spi_imx_data
> *spi_imx,
> >  				struct spi_transfer *transfer)
> >  {
> > -	bool word_delay = transfer->word_delay.value != 0;
> > +	bool word_delay = transfer->word_delay.value != 0 &&
> > +!spi_imx->target_mode;
> >  	int ret;
> >  	int i;
> >
> > +	if (transfer->len > MX53_MAX_TRANSFER_BYTES &&
> spi_imx->target_mode) {
> > +		dev_err(spi_imx->dev, "Transaction too big, max size is %d bytes\n",
> > +			MX53_MAX_TRANSFER_BYTES);
> > +		return -EMSGSIZE;
> > +	}
> 
> If there is this limitation, this check should go into spi_imx_can_dma().
> 

Yes. I can do this in V2.
>

 Marc
> 
> --
> Pengutronix e.K.                 | Marc Kleine-Budde          |
> Embedded Linux                   | https://www.pengutronix.de |
> Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
> Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |