[PATCH 5/6] spi: imx: support dynamic burst length for ECSPI DMA mode

[Marc Kleine-Budde]

On 25.11.2025 18:06:17, Carlos Song wrote:
> +static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx,
> +				struct spi_transfer *transfer)
> +{
> +	bool word_delay = transfer->word_delay.value != 0;
> +	int ret;
> +	int i;
> +
> +	ret = spi_imx_dma_data_prepare(spi_imx, transfer, word_delay);
> +	if (ret < 0) {
> +		transfer->error |= SPI_TRANS_FAIL_NO_START;
> +		dev_err(spi_imx->dev, "DMA data prepare fail\n");
> +		goto fallback_pio;
> +	}
> +
> +	spi_imx->rx_offset = 0;
> +
> +	/* Each dma_package performs a separate DMA transfer once */
> +	for (i = 0; i < spi_imx->dma_package_num; i++) {
> +		ret = spi_imx_dma_map(spi_imx, &spi_imx->dma_data[i]);
> +		if (ret < 0) {
> +			transfer->error |= SPI_TRANS_FAIL_NO_START;
> +			dev_err(spi_imx->dev, "DMA map fail\n");
> +			break;
> +		}
> +
> +		/* Update the CTRL register BL field */
> +		writel(spi_imx->dma_data[i].cmd_word, spi_imx->base + MX51_ECSPI_CTRL);
> +
> +		ret = spi_imx_dma_package_transfer(spi_imx, &spi_imx->dma_data[i],
> +						   transfer, word_delay);
> +
> +		/* Whether the dma transmission is successful or not, dma unmap is necessary */
> +		spi_imx_dma_unmap(spi_imx, &spi_imx->dma_data[i]);
> +
> +		if (ret < 0) {
> +			dev_dbg(spi_imx->dev, "DMA %d transfer not really finish\n", i);
> +			break;
> +		}
> +	}
> +
> +	for (int j = 0; j < spi_imx->dma_package_num; j++) {
> +		kfree(spi_imx->dma_data[j].dma_tx_buf);
> +		kfree(spi_imx->dma_data[j].dma_rx_buf);
> +	}
> +	kfree(spi_imx->dma_data);
> +
> +fallback_pio:
> +	/* If no any dma package data is transferred, fallback to PIO mode transfer */
> +	if ((transfer->error & SPI_TRANS_FAIL_NO_START) && i != 0)
> +		transfer->error &= !SPI_TRANS_FAIL_NO_START;
                                   ^
this doesn't look correct, you probably want to use a "~", right?

Marc


-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20251126/21f3233e/attachment.sig>