[PATCH] arm64: dts: morello: Add CMN PMU

[Vincenzo Frascino]

Hi Robin,

On 24/11/2025 16:35, Robin Murphy wrote:
> [ Trying to catch up with loose ends... ]
> 
> On 2025-05-27 1:55 pm, Robin Murphy wrote:
>> Although CMN-Skeena is mildly modified for the Morello hardware
>> architecture, it still identifies itself as CMN-600 r3p1. Since
>> there are also no documented changes to its PMU functionality,
>> we can make the PMU accessible via the standard CMN-600 binding.
>> In general, PMU registers are non-functional on CMN Fast Models,
>> so this is only meaningful for the real SDP hardware.
> 
> Vincenzo, Sudeep, any opinion on this? I believe it was considered useful by at
> least the one person who asked me about it :)
> 

Sorry, I missed your patch. Just acked it.

> Thanks,
> Robin.
> 
>>
>> Signed-off-by: Robin Murphy <robin.murphy at arm.com>
>> ---
>>   arch/arm64/boot/dts/arm/morello-sdp.dts | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/arm/morello-sdp.dts b/arch/arm64/boot/dts/
>> arm/morello-sdp.dts
>> index cee49dee7571..42c85f450fa9 100644
>> --- a/arch/arm64/boot/dts/arm/morello-sdp.dts
>> +++ b/arch/arm64/boot/dts/arm/morello-sdp.dts
>> @@ -108,6 +108,13 @@ smmu_pcie: iommu at 4f400000 {
>>           dma-coherent;
>>       };
>>   +    pmu at 50000000 {
>> +        compatible = "arm,cmn-600";
>> +        reg = <0x0 0x50000000 0x0 0x4000000>;
>> +        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
>> +        arm,root-node = <0x804000>;
>> +    };
>> +
>>       pcie_ctlr: pcie at 28c0000000 {
>>           device_type = "pci";
>>           compatible = "pci-host-ecam-generic";
> 

-- 
Regards,
Vincenzo