[PATCH v6 2/2] arm64: dts: add support for NXP i.MX8MP FRDM board

[Krzysztof Kozlowski]

On 23/11/2025 19:14, Rogerio Pimentel wrote:
> The FRDM-i.MX8MP is an NXP development platform based on the i.MX8M Plus
> SoC, featuring a quad Cortex-A53, Cortex-M7 co-processor, 4GB LPDDR4,
> 32GB eMMC, Wi-Fi 6/Bluetooth 5.4/802.15.4 tri-radio, Ethernet, HDMI/MIPI
> display interfaces, camera connectors, and standard expansion headers.
> 
> Based on the device tree found in the NXP repository at github
> https://github.com/nxp-imx-support/meta-imx-frdm and on imx8mp-evk
> board kernel mainline device tree.
> 
> This is a basic device tree supporting:
> 
>  - Quad Cortex-A53
>  - 4GB LPDDR4 DRAM
>  - PCA9450C PMIC with regulators
>  - Two NXP PCAL6416 GPIO expanders
>  - RGB LEDs via GPIO expander
>  - I2C1, I2C2, I2C3 controllers
>  - UART2 (console) and UART3 (with RTS/CTS)
>  - USDHC3 (8-bit eMMC)
>  - SNVS power key (onboard power button)
> 
> Co-developed-by: Xiaofeng Wei <xiaofeng.wei at nxp.com>
> Signed-off-by: Xiaofeng Wei <xiaofeng.wei at nxp.com>
> Signed-off-by: Rogerio Pimentel <rpimentel.silva at gmail.com>
> ---


Acked-by: Krzysztof Kozlowski <krzk at kernel.org>

Best regards,
Krzysztof