[PATCH 1/2] arm64: dts: tqma8xxs: replace 0 with IMX_LPCG_CLK_0 for lpcg indices

[Alexander Stein]

Replace the 0 with IMX_LPCG_CLK_0 for LPCG clock indices. Although the
numerical value is identical, the LPCG input is defined as
IMX_LPCG_CLK_<n>, so using the symbolic constant improves clarity and
consistency with the LPCG clock naming convention.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/tqma8xxs.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
index 2d0a329c2fa50..ebf20d5b5df9c 100644
--- a/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
+++ b/arch/arm64/boot/dts/freescale/tqma8xxs.dtsi
@@ -406,7 +406,7 @@ &sai1 {
 	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
 			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
 			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
-			  <&sai1_lpcg 0>;
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai1>;
-- 
2.43.0