[PATCH 1/1] arm64: dts: mba8xx: replace 0 with IMX_LPCG_CLK_0 for lpcg indices

[Frank Li]

Replace the 0 with IMX_LPCG_CLK_0 for LPCG clock indices. Although the
numerical value is identical, the LPCG input is defined as
IMX_LPCG_CLK_<n>, so using the symbolic constant improves clarity and
consistency with the LPCG clock naming convention.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/mba8xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
index c4b5663949ade..78f5dfdc5cc8a 100644
--- a/arch/arm64/boot/dts/freescale/mba8xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi
@@ -225,7 +225,7 @@ &i2c1 {
 	tlv320aic3x04: audio-codec at 18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&mclkout0_lpcg 0>;
+		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "mclk";
 		iov-supply = <&reg_1v8>;
 		ldoin-supply = <&reg_3v3>;
@@ -336,7 +336,7 @@ &sai1 {
 	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
 			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
 			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
-			  <&sai1_lpcg 0>;
+			  <&sai1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai1>;
-- 
2.34.1