[PATCH 2/3] ARM: dts: exynos: Add Samsung Manta (Google Nexus 10)
Henrik Grimler
henrik at grimler.se
Thu Nov 20 09:31:20 PST 2025
Hi Lukas,
On Thu, Nov 20, 2025 at 03:40:15PM +0100, Lukas Timmermann wrote:
> From: Alexandre Marquet <tb at a-marquet.fr>
>
> Manta is the code name for Google Nexus 10, and was manufactured by
> Samsung. This patch adds initial device-tree file for this board.
>
> Co-developed-by: Alexandre Marquet <tb at a-marquet.fr>
> Signed-off-by: Alexandre Marquet <tb at a-marquet.fr>
> Co-developed-by: Lukas Timmermann <linux at timmermann.space>
> Signed-off-by: Lukas Timmermann <linux at timmermann.space>
Awesome! I think this series would benefit from a cover letter
explaining what features are working, and perhaps saying something
about other patches that will be sent separately (if any). The as3668
led driver and bindings for example has not been merged, right? Adding
the lore link in a cover letter would therefore help reviewers.
One nitpick below that I happened to notice.
> ---
> arch/arm/boot/dts/samsung/Makefile | 1 +
> .../exynos5250-samsung-nexus10-manta.dts | 516 ++++++++++++++++++
> 2 files changed, 517 insertions(+)
> create mode 100644 arch/arm/boot/dts/samsung/exynos5250-samsung-nexus10-manta.dts
>
> diff --git a/arch/arm/boot/dts/samsung/Makefile b/arch/arm/boot/dts/samsung/Makefile
> index 7becf36656b1..c9cb06a8ff97 100644
> --- a/arch/arm/boot/dts/samsung/Makefile
> +++ b/arch/arm/boot/dts/samsung/Makefile
> @@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
> exynos4412-trats2.dtb
> dtb-$(CONFIG_ARCH_EXYNOS5) += \
> exynos5250-arndale.dtb \
> + exynos5250-samsung-nexus10-manta.dtb \
> exynos5250-smdk5250.dtb \
> exynos5250-snow.dtb \
> exynos5250-snow-rev5.dtb \
> diff --git a/arch/arm/boot/dts/samsung/exynos5250-samsung-nexus10-manta.dts b/arch/arm/boot/dts/samsung/exynos5250-samsung-nexus10-manta.dts
> new file mode 100644
> index 000000000000..84df54941bcd
> --- /dev/null
> +++ b/arch/arm/boot/dts/samsung/exynos5250-samsung-nexus10-manta.dts
> @@ -0,0 +1,516 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung Manta (Google Nexus 10) board device tree source
> + *
> + * Copyright (c) 2023-2025 Alexandre Marquet
> + * Copyright (c) 2025 Lukas Timmermann
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clock/maxim,max77686.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include "exynos-pinctrl.h"
> +#include "exynos5250.dtsi"
> +#include "exynos-mfc-reserved-memory.dtsi"
> +
> +/ {
> + model = "Google Nexus 10";
> + compatible = "samsung,nexus10-manta", "samsung,exynos5250", "samsung,exynos5";
> +
> + aliases {
> + mmc0 = &mmc_0; /* eMMC */
> + mmc1 = &mmc_1; /* WiFi */
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x40000000 0x20000000
> + 0x60000000 0x20000000
> + 0x80000000 0x20000000
> + 0xa0000000 0x1FF00000>;
Please use lower case letters, 0x1ff00000.
Best regards,
Henrik Grimler
> + };
> +
> + chosen {
> + stdout-path = &serial_2;
> + };
> +
> + firmware at 204f000 {
> + compatible = "samsung,secure-firmware";
> + reg = <0x0204f000 0x1000>;
> + };
> +
> + fixed-rate-clocks {
> + xxti {
> + compatible = "samsung,clock-xxti";
> + clock-frequency = <24000000>;
> + };
> +
> + xusbxti {
> + compatible = "samsung,clock-xusbxti";
> + clock-frequency = <24000000>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys>;
> +
> + key-down {
> + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEDOWN>;
> + label = "volume down";
> + debounce-interval = <5>;
> + };
> +
> + key-up {
> + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + label = "volume up";
> + debounce-interval = <5>;
> + };
> +
> + key-power {
> + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_POWER>;
> + label = "power";
> + debounce-interval = <5>;
> + wakeup-source;
> + };
> +
> + lid-switch {
> + label = "Lid";
> + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
> + linux,input-type = <5>; /* EV_SW */
> + linux,code = <0>; /* SW_LID */
> + debounce-interval = <10>;
> + wakeup-source;
> + };
> + };
> +
> + multi-led {
> + compatible = "leds-group-multicolor";
> + color = <LED_COLOR_ID_RGB>;
> + function = LED_FUNCTION_STATUS;
> + leds = <&status_red>, <&status_green>, <&status_blue>, <&status_white>;
> + };
> +
> + wlan_pwrseq: mmc1-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpv1 0 GPIO_ACTIVE_LOW>;
> + pinctrl-0 = <&wlan_pmena>;
> + pinctrl-names = "default";
> + clocks = <&max77686 MAX77686_CLK_PMIC>;
> + clock-names = "ext_clock";
> + post-power-on-delay-ms = <300>;
> + power-off-delay-us = <50>;
> + };
> +
> + bmp180_vddd_reg: regulator-bmp180-vddd {
> + compatible = "regulator-fixed";
> + regulator-name = "BMP180_VDDD";
> + };
> +
> + bmp180_vdda_reg: regulator-bmp180-vdda {
> + compatible = "regulator-fixed";
> + regulator-name = "BMP180_VDDA";
> + };
> +};
> +
> +&clock {
> + assigned-clocks = <&clock CLK_FOUT_APLL>;
> + assigned-clock-rates = <1000000000>;
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
> +
> +&ehci {
> + status = "disabled";
> +};
> +
> +&i2c_0 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> + samsung,i2c-slave-addr = <0x10>;
> +};
> +
> +&i2c_1 {
> + status = "okay";
> +
> + pressure at 77 {
> + compatible = "bosch,bmp180";
> + reg = <0x77>;
> + vddd-supply = <&bmp180_vddd_reg>;
> + vdda-supply = <&bmp180_vdda_reg>;
> + };
> +
> + imu at 68 {
> + compatible = "invensense,mpu6050";
> + reg = <0x68>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&acc_int>;
> + interrupt-parent = <&gpx1>;
> + interrupts = <4 IRQ_TYPE_EDGE_RISING>;
> + mount-matrix = "0", "-1", "0",
> + "-1", "0", "0",
> + "0", "0", "-1";
> +
> + i2c-gate {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + magnetometer at c {
> + compatible = "asahi-kasei,ak8963";
> + reg = <0x0c>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&msense_rst>;
> + mount-matrix = "-1", "0", "0",
> + "0", "1", "0",
> + "0", "0", "-1";
> + };
> + };
> + };
> +
> + led-controller at 42 {
> + compatible = "ams,as3668";
> + reg = <0x42>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status_red: led at 0 {
> + reg = <0x0>;
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_RED>;
> + };
> +
> + status_green: led at 1 {
> + reg = <0x1>;
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + status_blue: led at 2 {
> + reg = <0x2>;
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> +
> + status_white: led at 3 {
> + reg = <0x3>;
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_WHITE>;
> + };
> + };
> +};
> +
> +&i2c_2 {
> + status = "okay";
> +
> + light-sensor at 23 {
> + compatible = "rohm,bh1721";
> + reg = <0x23>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bh1721fvc_reset>;
> + reset-gpios = <&gph1 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + onewire at 18 {
> + compatible = "maxim,ds2484";
> + reg = <0x18>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&onewire_sleep>;
> + };
> +};
> +
> +&i2c_5 {
> + status = "okay";
> + samsung,i2c-sda-delay = <100>;
> +
> + max77686: pmic at 9 {
> + compatible = "maxim,max77686";
> + reg = <0x09>;
> + interrupt-parent = <&gpx0>;
> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&max77686_irq>;
> + #clock-cells = <1>;
> + wakeup-source;
> +
> + voltage-regulators {
> + ldo3_reg: LDO3 {
> + regulator-name = "VCC_1.8V_AP";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + ldo8_reg: LDO8 {
> + regulator-name = "VMIPI_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + ldo9_reg: LDO9 {
> + regulator-name = "TOUCH_VDD_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + ldo10_reg: LDO10 {
> + regulator-name = "VMIPI_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + ldo12_reg: LDO12 {
> + regulator-name = "VUOTG_3.0V";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + ldo15_reg: LDO15 {
> + regulator-name = "VHSIC_1.0V";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + ldo16_reg: LDO16 {
> + regulator-name = "VHSIC_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + ldo17_reg: LDO17 {
> + regulator-name = "5M_CORE_1.5V";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + };
> + ldo18_reg: LDO18 {
> + regulator-name = "CAM_IO_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + ldo19_reg: LDO19 {
> + regulator-name = "VT_CAM_1.8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + ldo20_reg: LDO20 {
> + regulator-name = "TA_CHECK_1.35V";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + };
> + ldo23_reg: LDO23 {
> + regulator-name = "TSP_AVDD_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + ldo24_reg: LDO24 {
> + regulator-name = "CAM_AF_2.8V";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + };
> + ldo25_reg: LDO25 {
> + regulator-name = "VADC_3.3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + buck3_reg: BUCK3 {
> + regulator-name = "vdd_int";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + buck4_reg: BUCK4 {
> + regulator-name = "vdd_g3d";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-boot-on;
> + };
> + };
> + };
> +};
> +
> +&mali {
> + status = "okay";
> + mali-supply = <&buck4_reg>;
> +};
> +
> +&mixer {
> + status = "okay";
> +};
> +
> +/* eMMC */
> +&mmc_0 {
> + status = "okay";
> + non-removable;
> + max-frequency = <200000000>;
> + sd-uhs-ddr50;
> + mmc-ddr-1_8v;
> + cap-mmc-hw-reset;
> + mmc-hs200-1_8v;
> + bus-width = <8>;
> + card-detect-delay = <200>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <1 2>;
> + samsung,dw-mshc-ddr-timing = <2 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
> +};
> +
> +/* WiFi */
> +&mmc_1 {
> + status = "okay";
> + non-removable;
> + max-frequency = <100000000>;
> + sd-uhs-sdr50;
> + cap-sd-highspeed;
> + keep-power-in-suspend;
> + bus-width = <4>;
> + card-detect-delay = <0>;
> + samsung,dw-mshc-ciu-div = <3>;
> + samsung,dw-mshc-sdr-timing = <2 4>;
> + samsung,dw-mshc-ddr-timing = <2 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
> + mmc-pwrseq = <&wlan_pwrseq>;
> +
> + wifi at 1 {
> + compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
> + reg = <1>;
> + interrupt-parent = <&gpx2>;
> + interrupts = <5 IRQ_TYPE_NONE>;
> + interrupt-names = "host-wake";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wlan_irq>;
> + };
> +};
> +
> +&ohci {
> + status = "disabled";
> +};
> +
> +&pinctrl_0 {
> + acc_int: acc-int-pins {
> + samsung,pins = "gpx1-4";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> + };
> +
> + max77686_irq: max77686-irq-pins {
> + samsung,pins = "gpx0-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> + };
> + gpio_keys: gpio-keys-pins-pins {
> + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-7", "gpx1-3";
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> + wlan_irq: wlan-irq-pins {
> + samsung,pins = "gpx2-5";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
> + };
> +};
> +
> +&pinctrl_1 {
> + bh1721fvc_reset: bh1721fvc-reset-pins {
> + samsung,pins = "gph1-2";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + };
> + msense_rst: msense-rst-pins {
> + samsung,pins = "gpg2-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + };
> + onewire_sleep: onewire-sleep-pins {
> + samsung,pins = "gpg0-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> + };
> +};
> +
> +&pinctrl_2 {
> + wlan_pmena: wlan-pmena-pins {
> + samsung,pins = "gpv1-0";
> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
> + samsung,pin-val = <0>;
> + };
> +};
> +
> +&pmu_system_controller {
> + assigned-clocks = <&pmu_system_controller 0>;
> + assigned-clock-parents = <&clock CLK_FIN_PLL>;
> +};
> +
> +&sd1_bus4 {
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> +};
> +
> +&sd1_cmd {
> + samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
> + samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
> +};
> +
> +/* Bluetooth */
> +&serial_0 {
> + status = "disabled";
> +};
> +
> +&serial_1 {
> + pinctrl-names = "default", "flow-control";
> + pinctrl-0 = <&uart1_data>;
> + pinctrl-1 = <&uart1_data>, <&uart1_fctl>;
> +};
> +
> +&serial_2 {
> + pinctrl-names = "default", "flow-control";
> + pinctrl-0 = <&uart2_data>;
> + pinctrl-1 = <&uart2_data>, <&uart2_fctl>;
> +};
> +
> +&usbdrd {
> + status = "disabled";
> +};
> +
> +&usbdrd_dwc3 {
> + status = "disabled";
> +};
> +
> +&usbdrd_phy {
> + status = "disabled";
> +};
> --
> 2.52.0
>
>
More information about the linux-arm-kernel
mailing list