[PATCH v4 06/10] drm/rockchip: dw_hdmi_qp: Set supported_formats platdata
Nicolas Frattaroli
nicolas.frattaroli at collabora.com
Mon Nov 17 11:11:50 PST 2025
With the introduction of the supported_formats member in the
dw-hdmi-qp platform data struct, drivers that have access to this
information should now set it.
Set it in the rockchip dw_hdmi_qp glue driver, where such a bitmask of
supported color formats already exists. It just needs to be converted to
the appropriate HDMI_COLORSPACE_ mask.
This allows this information to be passed down to the dw-hdmi-qp core,
which sets it in the bridge it creates, and consequently will allow the
common HDMI bridge code to act on it.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
---
drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
index c9fe6aa3e3e3..7c294751de19 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
@@ -468,6 +468,28 @@ static const struct of_device_id dw_hdmi_qp_rockchip_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, dw_hdmi_qp_rockchip_dt_ids);
+static const u32 supported_colorformats = DRM_COLOR_FORMAT_AUTO |
+ DRM_COLOR_FORMAT_RGB444 |
+ DRM_COLOR_FORMAT_YCBCR444;
+
+static unsigned int __pure drm_to_hdmi_fmts(const u32 fmt)
+{
+ unsigned int res = 0;
+
+ if (fmt & DRM_COLOR_FORMAT_AUTO)
+ res |= BIT(HDMI_COLORSPACE_RGB);
+ if (fmt & DRM_COLOR_FORMAT_RGB444)
+ res |= BIT(HDMI_COLORSPACE_RGB);
+ if (fmt & DRM_COLOR_FORMAT_YCBCR444)
+ res |= BIT(HDMI_COLORSPACE_YUV444);
+ if (fmt & DRM_COLOR_FORMAT_YCBCR422)
+ res |= BIT(HDMI_COLORSPACE_YUV422);
+ if (fmt & DRM_COLOR_FORMAT_YCBCR420)
+ res |= BIT(HDMI_COLORSPACE_YUV420);
+
+ return res;
+}
+
static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
void *data)
{
@@ -521,6 +543,8 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
plat_data.phy_data = hdmi;
plat_data.max_bpc = 10;
+ plat_data.supported_formats = drm_to_hdmi_fmts(supported_colorformats);
+
encoder = &hdmi->encoder.encoder;
encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
--
2.51.2
More information about the linux-arm-kernel
mailing list