[PATCH 2/4] media: nxp: use dev_err_probe() to simplify code

[Frank Li]

Use dev_err_probe() to simplify code. No functional change.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 drivers/media/platform/nxp/imx-mipi-csis.c    |  6 ++----
 drivers/media/platform/nxp/imx7-media-csi.c   | 13 ++++---------
 drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 28 ++++++++++++---------------
 3 files changed, 18 insertions(+), 29 deletions(-)

diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
index 088b2945aee33731c565f049dd17721356300b84..ce93d868746f002c22e2f86b1e0aa84ec1a76061 100644
--- a/drivers/media/platform/nxp/imx-mipi-csis.c
+++ b/drivers/media/platform/nxp/imx-mipi-csis.c
@@ -1547,10 +1547,8 @@ static int mipi_csis_probe(struct platform_device *pdev)
 	/* Now that the hardware is initialized, request the interrupt. */
 	ret = devm_request_irq(dev, irq, mipi_csis_irq_handler, 0,
 			       dev_name(dev), csis);
-	if (ret) {
-		dev_err(dev, "Interrupt request failed\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "Interrupt request failed\n");
 
 	/* Initialize and register the subdev. */
 	ret = mipi_csis_subdev_init(csis);
diff --git a/drivers/media/platform/nxp/imx7-media-csi.c b/drivers/media/platform/nxp/imx7-media-csi.c
index 933a5f39f9f4c9b43ca8d2a1819d0145981266e6..82109e6884a4d931a84ef02e2bde41d0d7248511 100644
--- a/drivers/media/platform/nxp/imx7-media-csi.c
+++ b/drivers/media/platform/nxp/imx7-media-csi.c
@@ -2218,11 +2218,8 @@ static int imx7_csi_probe(struct platform_device *pdev)
 
 	/* Acquire resources and install interrupt handler. */
 	csi->mclk = devm_clk_get(&pdev->dev, "mclk");
-	if (IS_ERR(csi->mclk)) {
-		ret = PTR_ERR(csi->mclk);
-		dev_err(dev, "Failed to get mclk: %d", ret);
-		return ret;
-	}
+	if (IS_ERR(csi->mclk))
+		return dev_err_probe(dev, PTR_ERR(csi->mclk), "Failed to get mclk\n");
 
 	csi->irq = platform_get_irq(pdev, 0);
 	if (csi->irq < 0)
@@ -2236,10 +2233,8 @@ static int imx7_csi_probe(struct platform_device *pdev)
 
 	ret = devm_request_irq(dev, csi->irq, imx7_csi_irq_handler, 0, "csi",
 			       (void *)csi);
-	if (ret < 0) {
-		dev_err(dev, "Request CSI IRQ failed.\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Request CSI IRQ failed.\n");
 
 	/* Initialize all the media device infrastructure. */
 	ret = imx7_csi_media_init(csi);
diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
index 0851f4a9ae52d3096f454da643cfdc5017e000b1..75709161fb26a61239b94430365849e022fdc14f 100644
--- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
+++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
@@ -951,10 +951,9 @@ static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
 	int ret = 0;
 
 	state->rst = devm_reset_control_array_get_exclusive(dev);
-	if (IS_ERR(state->rst)) {
-		dev_err(dev, "Failed to get reset: %pe\n", state->rst);
-		return PTR_ERR(state->rst);
-	}
+	if (IS_ERR(state->rst))
+		return dev_err_probe(dev, PTR_ERR(state->rst),
+				     "Failed to get reset: %pe\n", state->rst);
 
 	if (state->pdata->use_reg_csr) {
 		const struct regmap_config regmap_config = {
@@ -977,24 +976,21 @@ static int imx8mq_mipi_csi_parse_dt(struct csi_state *state)
 
 	ret = of_property_read_u32_array(np, "fsl,mipi-phy-gpr", out_val,
 					 ARRAY_SIZE(out_val));
-	if (ret) {
-		dev_err(dev, "no fsl,mipi-phy-gpr property found: %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "no fsl,mipi-phy-gpr property found: %d\n", ret);
 
 	ph = *out_val;
 
 	node = of_find_node_by_phandle(ph);
-	if (!node) {
-		dev_err(dev, "Error finding node by phandle\n");
-		return -ENODEV;
-	}
+	if (!node)
+		return dev_err_probe(dev, -ENODEV, "Error finding node by phandle\n");
+
 	state->phy_gpr = syscon_node_to_regmap(node);
 	of_node_put(node);
-	if (IS_ERR(state->phy_gpr)) {
-		dev_err(dev, "failed to get gpr regmap: %pe\n", state->phy_gpr);
-		return PTR_ERR(state->phy_gpr);
-	}
+	if (IS_ERR(state->phy_gpr))
+		return dev_err_probe(dev, PTR_ERR(state->phy_gpr),
+				     "failed to get gpr regmap: %pe\n", state->phy_gpr);
 
 	state->phy_gpr_reg = out_val[1];
 	dev_dbg(dev, "phy gpr register set to 0x%x\n", state->phy_gpr_reg);

-- 
2.34.1