[PATCH 2/3] dma: arm-dma350: add support for shared interrupt mode

[Jun Guo]

On 11/17/2025 7:32 PM, Robin Murphy wrote:
> On 2025-11-17 1:59 am, Jun Guo wrote:
>> - The arm dma350 controller's hardware implementation varies: some
>>   designs dedicate a separate interrupt line for each channel, while
>>   others have all channels sharing a single interrupt.This patch adds
>>   support for the hardware design where all DMA channels share a
>>   single interrupt.
> 
> We already request the channel interrupts as shared, precisely because
> they could well end up muxed to the same physical interrupt line. I
> missed that the dedicated combined interrupt output had its own separate
> enable, but for that we may as well just set INTREN_ANYCHINTR_EN
> unconditionally - the rest of this seems pointless.
I'm not entirely sure if enabling the INTREN_ANYCHINTR_EN bit to 1 would 
affect the current default scenario where each channel is assigned its 
own interrupt. The hardware design of the chip I'm currently working 
with does not support testing the scenario of individual interrupts per 
channel. If it doesn't cause any issues, I will change it to an 
unconditional configuration.