[PATCH v2 0/2] arm64: dts: freescale: add Toradex SMARC iMX95

[Shawn Guo]

On Tue, Nov 11, 2025 at 04:16:12PM +0100, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini at toradex.com>
> 
> This series adds support for the Toradex SMARC iMX95 SoM and the
> Toradex SMARC Development Board.
> 
> The module consists of an NXP i.MX95 family SoC, up to 16GB of LPDDR5
> RAM and up to 128GB of storage, a USB 3.0 Host Hub and 2.0 OTG, two
> Gigabit Ethernet PHYs, a 10 Gigabit Ethernet interface, an I2C EEPROM
> and Temperature Sensor, an RX8130 RTC, a Quad/Dual lane CSI interface,
> and some optional addons: TPM 2.0, DSI, LVDS, DisplayPort (through a
> DSI-DP bridge), and Wi-Fi/BT module.
> 
> Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
> Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
> 
> João Paulo Gonçalves (1):
>   dt-bindings: arm: fsl: add Toradex SMARC iMX95
> 
> Max Krummenacher (1):
>   arm64: dts: freescale: add Toradex SMARC iMX95

Applied both, thanks!