[GIT PULL] i.MX fixes for 6.18, 2nd round

[Shawn Guo]

The following changes since commit 6504297872c7a5d0d06247970d32940eba26b8b3:

  arm64: dts: imx8mp-kontron: Fix USB OTG role switching (2025-10-28 17:01:42 +0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.18-2

for you to fetch changes up to e89ee35567d3d465ef0715953170be72f5ef1d4c:

  arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity (2025-11-16 21:10:06 +0800)

----------------------------------------------------------------
i.MX fixes for 6.18, 2nd round:

- Correct i.MX8DXL's pcie-ep interrupt number (Frank Li)
- Swap interrupt numbers of eqos for imx8dxl-ss-conn (Frank Li)
- Correct SAI3 interrupt line for i.MX6UL (Maarten Zanders)
- Correct mux-controller select/enable-gpios polarity for imx8qm-mek
  board (Xu Yang)

----------------------------------------------------------------
Frank Li (2):
      arm64: dts: imx8dxl: Correct pcie-ep interrupt number
      arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos

Maarten Zanders (1):
      ARM: dts: nxp: imx6ul: correct SAI3 interrupt line

Xu Yang (1):
      arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity

 arch/arm/boot/dts/nxp/imx/imx6ul.dtsi              | 2 +-
 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi | 5 +++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts       | 4 ++--
 4 files changed, 10 insertions(+), 5 deletions(-)