[PATCH] arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity

[Shawn Guo]

On Thu, Nov 13, 2025 at 07:14:44PM +0800, Xu Yang wrote:
> According to the board design, set SEL to high means flipped
> connection (TX2/RX2). And the TCPM will output logical 1 if it needs
> flipped connection. So switch to active high for select-gpios.
> The EN pin on mux chip is low active, so switch to active low for
> enable-gpios too.
> 
> Fixes: b237975b2cd5 ("arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes")
> Cc: stable at vger.kernel.org
> Reviewed-by: Jun Li <jun.li at nxp.com>
> Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>

Applied, thanks!