[PATCH v2 4/5] ARM: dts: lpc3250-phy3250: rename nodename at at 0 to eeprom at 0

[Frank Li]

Rename nodename at at 0 to eeprom at 0 to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dtb: at25 at 0 (atmel,at25): $nodename: 'anyOf' conditional failed, one must be fixed:
	'at25 at 0' does not match '^eeprom@[0-9a-f]{1,2}$'
	'at25 at 0' does not match '^fram@[0-9a-f]{1,2}$'

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
change in v2
- new patch
---
 arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
index 732d590f6cfdf..15463a96938cc 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc3250-phy3250.dts
@@ -200,7 +200,7 @@ &ssp0 {
 	cs-gpios = <&gpio 3 5 0>;
 	status = "okay";
 
-	eeprom: at25 at 0 {
+	eeprom: eeprom at 0 {
 		compatible = "atmel,at25";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-- 
2.34.1