[PATCH v8 3/3] arm64: dts: ti: k3-am62l: add initial reference board file

[Vignesh Raghavendra]

On 05/11/25 21:16, Bryan Brattlof wrote:
> From: Vignesh Raghavendra <vigneshr at ti.com>
> 
> Add the initial board file for the AM62L3's Evaluation Module.
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
> Reviewed-by: Dhruva Gole <d-gole at ti.com>
> Signed-off-by: Bryan Brattlof <bb at ti.com>
> ---
> Changes from v1:
>  - switched to non-direct links so TRM updates are automatic
>  - removed current-speed property from main_uart0
>  - removed empty reserved-memory{} node
>  - removed serial2 from aliases{} node
>  - corrected main_uart0 pinmux
> 
> Changes from v2:
>  - alphabetized phandles
>  - corrected macros and node names for main_uart0 pinmux node
> 
> Changes from v3:
>  - added and enabled more nodes that have been validated
>  - added link to data sheet which is now public
> 
> Changes from v4:
>  - Corrected Copyright year
> 
> Changes from v6:
>  - moved thermal-zones{} into the k3-am62l3-evm.dts to allow other
>    boards to selec whichever trip points they wish
> 
> Changes from v7:
>  - enabled &i2c0 to access the eeprom on the board
> ---
>  arch/arm64/boot/dts/ti/Makefile          |   3 +
>  arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 362 +++++++++++++++++++++++++++++++
>  2 files changed, 365 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 361248dcfff42a27f07cea6bca31461f8dc25b92..386ab1e91bcc3463e2d0618919da1ec3ce314bf2 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -37,6 +37,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb
>  # Boards with AM62Dx SoC
>  dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb
>  
> +# Boards with AM62Lx SoCs
> +dtb-$(CONFIG_ARCH_K3) += k3-am62l3-evm.dtb
> +
>  # Boards with AM62Px SoC
>  dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
>  dtb-$(CONFIG_ARCH_K3) += k3-am62p5-var-som-symphony.dtb
> diff --git a/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> new file mode 100644
> index 0000000000000000000000000000000000000000..34c24b368d9e88cd94a7426cd1524f096e9c43c9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62l3-evm.dts
> @@ -0,0 +1,362 @@
> +// SPDX-License-Identifier: GPL-2.0-only or MIT
> +/*
> + * Device Tree file for the AM62L3 Evaluation Module
> + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
> + *
> + * Technical Reference Manual: https://www.ti.com/lit/pdf/sprujb4
> + * Data Sheet: https://www.ti.com/lit/pdf/sprspa1
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/net/ti-dp83867.h>
> +#include <dt-bindings/thermal/thermal.h>
> +#include "k3-am62l3.dtsi"
> +#include "k3-pinctrl.h"
> +
> +

Extra blank line.. I can fix this locally before queuing.

[...]

-- 
Regards
Vignesh
https://ti.com/opensource