[PATCH v4 12/12] arm64: dts: st: Add I/O sync to eth pinctrl in stm32mp25-pinctrl.dtsi

[Alexandre TORGUE]

Ciao Antonio

On 10/23/25 15:27, Antonio Borneo wrote:
> On board stm32mp257f-ev1, the propagation delay between eth1/eth2
> and the external PHY requires a compensation to guarantee that no
> packet get lost in all the working conditions.
> 
> Add I/O synchronization properties in pinctrl on all the RGMII
> data pins, activating re-sampling on both edges of the clock.
> 
> Co-developed-by: Christophe Roullier <christophe.roullier at foss.st.com>
> Signed-off-by: Christophe Roullier <christophe.roullier at foss.st.com>
> Signed-off-by: Antonio Borneo <antonio.borneo at foss.st.com>
> ---
>   arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
> index e0d102eb61769..c34cd33cd855f 100644
> --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
> @@ -38,6 +38,7 @@ pins1 {
>   			bias-disable;
>   			drive-push-pull;
>   			slew-rate = <3>;
> +			st,io-sync = "data on both edges";
>   		};
>   		pins2 {
>   			pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
> @@ -53,6 +54,7 @@ pins3 {
>   				 <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
>   				 <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
>   			bias-disable;
> +			st,io-sync = "data on both edges";
>   		};
>   		pins4 {
>   			pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
> @@ -142,6 +144,7 @@ pins1 {
>   			bias-disable;
>   			drive-push-pull;
>   			slew-rate = <3>;
> +			st,io-sync = "data on both edges";
>   		};
>   		pins2 {
>   			pinmux = <STM32_PINMUX('F', 8, AF10)>, /* ETH_RGMII_CLK125 */
> @@ -164,6 +167,7 @@ pins4 {
>   				 <STM32_PINMUX('C', 11, AF10)>, /* ETH_RGMII_RXD3 */
>   				 <STM32_PINMUX('C', 3, AF10)>; /* ETH_RGMII_RX_CTL */
>   			bias-disable;
> +			st,io-sync = "data on both edges";
>   		};
>   		pins5 {
>   			pinmux = <STM32_PINMUX('F', 6, AF10)>; /* ETH_RGMII_RX_CLK */

Applied on stm32-next.

Thanks.
Alex