[PATCH 1/2] clk: visconti: Do not define number of clocks in bindings

[Yuji Ishikawa]

Remove use of TMPV770X_NR_CLK.
Instead, define number of clocks inside the driver directory.

The same for TMPV770X_NR_RESET and TMPV770X_NR_PLL.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa at toshiba.co.jp>
---
 drivers/clk/visconti/clkc-tmpv770x.c | 8 ++++++--
 drivers/clk/visconti/pll-tmpv770x.c  | 5 ++++-
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/visconti/clkc-tmpv770x.c b/drivers/clk/visconti/clkc-tmpv770x.c
index 6c753b2cb..94a736da6 100644
--- a/drivers/clk/visconti/clkc-tmpv770x.c
+++ b/drivers/clk/visconti/clkc-tmpv770x.c
@@ -17,6 +17,10 @@
 #include "clkc.h"
 #include "reset.h"
 
+/* Must be equal to the last clock/reset ID increased by one */
+#define CLKS_NR	(TMPV770X_CLK_BUSLCK + 1)
+#define RESETS_NR	(TMPV770X_RESET_SBUSCLK + 1)
+
 static DEFINE_SPINLOCK(tmpv770x_clk_lock);
 static DEFINE_SPINLOCK(tmpv770x_rst_lock);
 
@@ -234,12 +238,12 @@ static int visconti_clk_probe(struct platform_device *pdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	ctx = visconti_init_clk(dev, regmap, TMPV770X_NR_CLK);
+	ctx = visconti_init_clk(dev, regmap, CLKS_NR);
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
 	ret = visconti_register_reset_controller(dev, regmap, clk_reset_data,
-						 TMPV770X_NR_RESET,
+						 RESETS_NR,
 						 &visconti_reset_ops,
 						 &tmpv770x_rst_lock);
 	if (ret) {
diff --git a/drivers/clk/visconti/pll-tmpv770x.c b/drivers/clk/visconti/pll-tmpv770x.c
index 8360ccf88..a2208c5fc 100644
--- a/drivers/clk/visconti/pll-tmpv770x.c
+++ b/drivers/clk/visconti/pll-tmpv770x.c
@@ -16,6 +16,9 @@
 
 #include "pll.h"
 
+/* Must be equal to the last pll ID increased by one */
+#define PLLS_NR	(TMPV770X_PLL_PIIMGERPLL + 1)
+
 static DEFINE_SPINLOCK(tmpv770x_pll_lock);
 
 static const struct visconti_pll_rate_table pipll0_rates[] __initconst = {
@@ -66,7 +69,7 @@ static void __init tmpv770x_setup_plls(struct device_node *np)
 	if (!reg_base)
 		return;
 
-	ctx = visconti_init_pll(np, reg_base, TMPV770X_NR_PLL);
+	ctx = visconti_init_pll(np, reg_base, PLLS_NR);
 	if (IS_ERR(ctx)) {
 		iounmap(reg_base);
 		return;
-- 
2.34.1