[PATCH v2 2/3] dt-bindings: mfd: Add Realtek MISC system controller

[Krzysztof Kozlowski]

On 13/11/2025 13:30, Yu-Chun Lin wrote:
> Add DT binding schema for Realtek system controller.

What is Realtek system controller? I already asked.

I have Realtek WiFi RT8192, so it is the same, right?

> 
> Signed-off-by: Yu-Chun Lin <eleanor.lin at realtek.com>
> ---
>  .../devicetree/bindings/mfd/realtek,misc.yaml | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/realtek,misc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/realtek,misc.yaml b/Documentation/devicetree/bindings/mfd/realtek,misc.yaml
> new file mode 100644
> index 000000000000..4f4a9ae250be
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/realtek,misc.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/realtek,misc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek MISC System Controller
> +
> +description:
> +  The Realtek MISC System Controller is a register area that contains
> +  miscellaneous system registers for the SoC and serves as a parent node
> +  for other functions.
> +
> +maintainers:
> +  - James Tai <james.tai at realtek.com>
> +  - Yu-Chun Lin <eleanor.lin at realtek.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - realtek,misc

Nothing improved, still no soc part. You received comment on that - you
need soc specific compatibles.

Explain properly what is the hardware. You have entire commit msg for that.

Did you read writing bindings doc?



> +      - const: syscon
> +      - const: simple-mfd
> +
> +  reg:
> +    maxItems: 1
> +
> +  ranges:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +patternProperties:
> +  "^serial@[0-9a-f]+$":
> +    type: object
> +    description: UART controllers inside MISC area

Please read what is a syscon. Then please bring justification why you
claim that SNPS block is part of miscellaneous registers, because it
highly unlikely. Reach to your hardware engineers to explain that.
 > +
> +required:
> +  - compatible
> +  - reg
> +  - ranges
> +  - '#address-cells'
> +  - '#size-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    syscon at 7000 {
> +        compatible = "realtek,misc", "syscon", "simple-mfd";
> +        reg = <0x7000 0x1000>;
> +        ranges = <0x0 0x7000 0x1000>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        uart0: serial at 800 {
> +            compatible = "snps,dw-apb-uart";
> +            reg = <0x800 0x100>;
> +            clock-frequency = <432000000>;
> +            interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> +            reg-io-width = <4>;
> +            reg-shift = <2>;
> +            status = "disabled";

Your code is not improving, but going opposite direction. There is no
such code in the bindings, drop.

> +        };
> +    };


Best regards,
Krzysztof