[PATCH v2 13/16] ARM: dts: stm32: Update LED node for stm32mp15xx-dkx board

[Patrice Chotard]

Add led-red node for stm32mp15xx-dkx, this LED is used as status
LED in U-Boot.
Update led-blue node by adding color property and replacing obsolete
label property by function property.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 8cea6facd27b..fc0ff818e1fa 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
@@ -64,11 +65,18 @@ retram: retram at 38000000 {
 	led {
 		compatible = "gpio-leds";
 		led-blue {
-			label = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
+
+		led-red {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	sound {

-- 
2.43.0