[PATCH] PCI: cadence: Kconfig: change PCIE_CADENCE configs from tristate to bool

Siddharth Vadapalli s-vadapalli at ti.com
Thu Nov 13 02:43:59 PST 2025


On Thu, 2025-11-13 at 18:38 +0800, Hans Zhang wrote:
> Hi Siddharth,
> 
> 
> Your patch repeats this part.

I am not sure I understand the "repetition" that you are referring to. The
patch below is updating:
PCIE_CADENCE_PLAT, PCIE_CADENCE_PLAT_HOST and PCIE_CADENCE_PLAT_EP
from 'bool' to 'tristate'.

The current patch is updating:
PCIE_CADENCE, PCIE_CADENCE_HOST and PCIE_CADENCE_EP
[No 'PLAT' in the configs]
from 'tristate' to 'bool'.

> 
> 
> https://patchwork.kernel.org/project/linux-pci/patch/20251108140305.1120117-2-hans.zhang@cixtech.com/
> 
> Best regards,
> Hans
> 
> On 11/13/2025 5:27 PM, Siddharth Vadapalli wrote:
> > EXTERNAL EMAIL
> > 
> > The drivers associated with the PCIE_CADENCE, PCIE_CADENCE_HOST AND
> > PCIE_CADENCE_EP configs are used by multiple vendor drivers and serve as a
> > library of helpers. Since the vendor drivers could individually be built
> > as built-in or as loadable modules, it is possible to select a build
> > configuration wherein a vendor driver is built-in while the library is
> > built as a loadable module. This will result in a build error as reported
> > in the 'Closes' link below.
> > 
> > Address the build error by changing the library configs to be 'bool'
> > instead of 'tristate'.
> > 
> > Reported-by: kernel test robot <lkp at intel.com>
> > Closes: https://lore.kernel.org/oe-kbuild-all/202511111705.MZ7ls8Hm-lkp@intel.com/
> > Fixes: 1c72774df028 ("PCI: sg2042: Add Sophgo SG2042 PCIe driver")
> > Cc: <stable at vger.kernel.org>
> > Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> > ---
> >   drivers/pci/controller/cadence/Kconfig | 6 +++---
> >   1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
> > index 02a639e55fd8..980da64ce730 100644
> > --- a/drivers/pci/controller/cadence/Kconfig
> > +++ b/drivers/pci/controller/cadence/Kconfig
> > @@ -4,16 +4,16 @@ menu "Cadence-based PCIe controllers"
> >          depends on PCI
> > 
> >   config PCIE_CADENCE
> > -       tristate
> > +       bool
> > 
> >   config PCIE_CADENCE_HOST
> > -       tristate
> > +       bool
> >          depends on OF
> >          select IRQ_DOMAIN
> >          select PCIE_CADENCE
> > 
> >   config PCIE_CADENCE_EP
> > -       tristate
> > +       bool
> >          depends on OF
> >          depends on PCI_ENDPOINT
> >          select PCIE_CADENCE
> > --
> > 2.51.1
> > 
> > 

Regards,
Siddharth.



More information about the linux-arm-kernel mailing list