[PATCH 10/15] ARM: dts: stm32: Add boot-led for stm32mp135f-dk

[Patrice Chotard]

Add options/u-boot/boot-led property to specify to U-Boot
the LED which indicates a successful boot.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp135f-dk.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 909372da711b..0a2124eeca2b 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -73,7 +73,7 @@ button-user {
 	leds {
 		compatible = "gpio-leds";
 
-		led-blue {
+		led_blue: led-blue {
 			function = LED_FUNCTION_HEARTBEAT;
 			color = <LED_COLOR_ID_BLUE>;
 			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
@@ -88,6 +88,13 @@ led-red {
 		};
 	};
 
+	options {
+		u-boot {
+			compatible = "u-boot,config";
+			boot-led = <&led_blue>;
+		};
+	};
+
 	panel_backlight: panel-backlight {
 		compatible = "gpio-backlight";
 		gpios = <&gpioe 12 GPIO_ACTIVE_HIGH>;

-- 
2.43.0