[PATCH 12/16] ARM: dts: stm32: Add red LED for stm32mp157c-ed1 board

[Patrice Chotard]

Add led-red node for stm32mp157c-ed1.
This LED is used as status LED in U-Boot.

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
 arch/arm/boot/dts/st/stm32mp157c-ed1.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index f6c478dbd041..6a1c4e5d31a4 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -81,6 +81,12 @@ led-blue {
 			function = LED_FUNCTION_HEARTBEAT;
 			color = <LED_COLOR_ID_BLUE>;
 		};
+
+		led-red {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	sd_switch: regulator-sd_switch {

-- 
2.43.0