[PATCH RFC 4/4] arm64/io: Add {__raw_read|__raw_write}128 support

[Mark Rutland]

On Wed, Nov 12, 2025 at 09:58:46AM +0800, Chenghai Huang wrote:
> From: Weili Qian <qianweili at huawei.com>
> 
> Starting from ARMv8.4, stp and ldp instructions become atomic.

That's not true for accesses to Device memory types.

Per ARM DDI 0487, L.b, section B2.2.1.1 ("Changes to single-copy atomicity in
Armv8.4"):

  If FEAT_LSE2 is implemented, LDP, LDNP, and STP instructions that load
  or store two 64-bit registers are single-copy atomic when all of the
  following conditions are true:
  • The overall memory access is aligned to 16 bytes.
  • Accesses are to Inner Write-Back, Outer Write-Back Normal cacheable memory.

IIUC when used for Device memory types, those can be split, and a part
of the access could be replayed multiple times (e.g. due to an
intetrupt).

I don't think we can add this generally. It is not atomic, and not
generally safe.

Mark.

> Currently, device drivers depend on 128-bit atomic memory IO access,
> but these are implemented within the drivers. Therefore, this introduces
> generic {__raw_read|__raw_write}128 function for 128-bit memory access.
> 
> Signed-off-by: Weili Qian <qianweili at huawei.com>
> Signed-off-by: Chenghai Huang <huangchenghai2 at huawei.com>
> ---
>  arch/arm64/include/asm/io.h | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
> index 83e03abbb2ca..80430750a28c 100644
> --- a/arch/arm64/include/asm/io.h
> +++ b/arch/arm64/include/asm/io.h
> @@ -50,6 +50,17 @@ static __always_inline void __raw_writeq(u64 val, volatile void __iomem *addr)
>  	asm volatile("str %x0, %1" : : "rZ" (val), "Qo" (*ptr));
>  }
>  
> +#define __raw_write128 __raw_write128
> +static __always_inline void __raw_write128(u128 val, volatile void __iomem *addr)
> +{
> +	u64 low, high;
> +
> +	low = val;
> +	high = (u64)(val >> 64);
> +
> +	asm volatile ("stp %x0, %x1, [%2]\n" :: "rZ"(low), "rZ"(high), "r"(addr));
> +}
> +
>  #define __raw_readb __raw_readb
>  static __always_inline u8 __raw_readb(const volatile void __iomem *addr)
>  {
> @@ -95,6 +106,16 @@ static __always_inline u64 __raw_readq(const volatile void __iomem *addr)
>  	return val;
>  }
>  
> +#define __raw_read128 __raw_read128
> +static __always_inline u128 __raw_read128(const volatile void __iomem *addr)
> +{
> +	u64 high, low;
> +
> +	asm volatile("ldp %0, %1, [%2]" : "=r" (low), "=r" (high) : "r" (addr));
> +
> +	return (((u128)high << 64) | (u128)low);
> +}
> +
>  /* IO barriers */
>  #define __io_ar(v)							\
>  ({									\
> -- 
> 2.33.0
> 
>