[PATCH v7 1/5] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string

[Frank Li]

On Tue, Nov 11, 2025 at 11:10:25PM +0200, Laurent Pinchart wrote:
> On Tue, Nov 11, 2025 at 03:47:51PM -0500, Frank Li wrote:
> > On Mon, Oct 27, 2025 at 02:05:37AM +0200, Laurent Pinchart wrote:
> > > On Thu, Oct 23, 2025 at 05:19:42PM +0800, Guoniu Zhou wrote:
> > > > From: Guoniu Zhou <guoniu.zhou at nxp.com>
> > > >
> > > > The CSI-2 receiver in the i.MX8ULP is almost identical to the version
> > > > present in the i.MX8QXP/QM, but i.MX8ULP CSI-2 controller needs pclk
> > > > clock as the input clock for its APB interface of Control and Status
> > > > register(CSR). So add compatible string fsl,imx8ulp-mipi-csi2 and
> > > > increase maxItems of Clocks (clock-names) to 4 from 3.  And keep the
> > > > same restriction for existing compatible.
> > > >
> > > > Reviewed-by: Frank Li <Frank.Li at nxp.com>
> > > > Acked-by: Conor Dooley <conor.dooley at microchip.com>
> > > > Signed-off-by: Guoniu Zhou <guoniu.zhou at nxp.com>
> > > > ---
> > > >  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml       | 41 ++++++++++++++++++++--
> > > >  1 file changed, 39 insertions(+), 2 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> > > > index 3389bab266a9adbda313c8ad795b998641df12f3..da3978da1cab75292ada3f24837443f7f4ab6418 100644
> > > > --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> > > > +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> > > > @@ -20,6 +20,7 @@ properties:
> > > >        - enum:
> > > >            - fsl,imx8mq-mipi-csi2
> > > >            - fsl,imx8qxp-mipi-csi2
> > > > +          - fsl,imx8ulp-mipi-csi2
> > > >        - items:
> > > >            - const: fsl,imx8qm-mipi-csi2
> > > >            - const: fsl,imx8qxp-mipi-csi2
> > > > @@ -39,12 +40,16 @@ properties:
> > > >                       clock that the RX DPHY receives.
> > > >        - description: ui is the pixel clock (phy_ref up to 333Mhz).
> > > >                       See the reference manual for details.
> > > > +      - description: pclk is clock for csr APB interface.
> > > > +    minItems: 3
> > > >
> > > >    clock-names:
> > > >      items:
> > > >        - const: core
> > > >        - const: esc
> > > >        - const: ui
> > > > +      - const: pclk
> > > > +    minItems: 3
> > > >
> > > >    power-domains:
> > > >      maxItems: 1
> > > > @@ -130,19 +135,51 @@ allOf:
> > > >          compatible:
> > > >            contains:
> > > >              enum:
> > > > -              - fsl,imx8qxp-mipi-csi2
> > > > +              - fsl,imx8ulp-mipi-csi2
> > > > +    then:
> > > > +      properties:
> > > > +        reg:
> > > > +          minItems: 2
> > > > +        resets:
> > > > +          minItems: 2
> > > > +          maxItems: 2
> > > > +        clocks:
> > > > +          minItems: 4
> > > > +        clock-names:
> > > > +          minItems: 4
> > >
> > > Do we need the clock-names constraint ? The DT schemas will enforce that
> > > clocks and clock-names always have the same number of elements.
> >
> > clock-names list already restrict at top section
> >
> > clock-names:
> >   items:
> >     - const: core
> >     - const: esc
> >     - const: ui
> >     - const: pclk
> >   minItems: 3
> >
> > Here just restrict need 4 clocks, instead 3 clock for fsl,imx8ulp-mipi-csi2
>
> I understand that. My point was that the dt-schema will always verify
> that the number of clocks items is equal to the number of clock-names
> items. That's a constraint enforced by the core schemas. As
> clocks: minItems is set to 4, the clock-names: minItems constraint is
> redundant.

I am not sure when have such features. Previous comments from Rob require
clocks and clock-names keep the same at binding yaml.

https://lore.kernel.org/linux-devicetree/20251031000012.GA466250-robh@kernel.org/

Rob have not said that clock-names can be removed.

Do you have any thread, which inidicate we only need limit clocks at
if-else branch?

I also have not found related commit at
https://github.com/devicetree-org/dt-schema.git

Frank

>
> > > > +
> > > > +  - if:
> > > > +      properties:
> > > > +        compatible:
> > > > +          contains:
> > > > +            const: fsl,imx8qxp-mipi-csi2
> > > >      then:
> > > >        properties:
> > > >          reg:
> > > >            minItems: 2
> > > >          resets:
> > > >            maxItems: 1
> > > > -    else:
> > > > +        clocks:
> > > > +          maxItems: 3
> > > > +        clock-names:
> > > > +          maxItems: 3
> > > > +
> > > > +  - if:
> > > > +      properties:
> > > > +        compatible:
> > > > +          contains:
> > > > +            enum:
> > > > +              - fsl,imx8mq-mipi-csi2
> > > > +    then:
> > > >        properties:
> > > >          reg:
> > > >            maxItems: 1
> > > >          resets:
> > > >            minItems: 3
> > > > +        clocks:
> > > > +          maxItems: 3
> > > > +        clock-names:
> > > > +          maxItems: 3
> > > >        required:
> > > >          - fsl,mipi-phy-gpr
> > > >
> > >
> > > Could you please sort those conditional blocks by alphabetical order of
> > > the compatible strings ?
>
> --
> Regards,
>
> Laurent Pinchart