[PATCH] drm: xlnx: zynqmp_dp: Support DRM_FORMAT_XRGB8888

[Sean Anderson]

On 11/4/25 16:53, Sean Anderson wrote:
> On 6/27/25 10:50, Mike Looijmans wrote:
>> XRGB8888 is the default mode that Xorg will want to use. Add support
>> for this to the Zynqmp DisplayPort driver, so that applications can use
>> 32-bit framebuffers. This solves that the X server would fail to start
>> unless one provided an xorg.conf that sets DefaultDepth to 16.
>> 
>> Signed-off-by: Mike Looijmans <mike.looijmans at topic.nl>
>> ---
>> 
>>  drivers/gpu/drm/xlnx/zynqmp_disp.c | 5 +++++
>>  1 file changed, 5 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c b/drivers/gpu/drm/xlnx/zynqmp_disp.c
>> index 80d1e499a18d..501428437000 100644
>> --- a/drivers/gpu/drm/xlnx/zynqmp_disp.c
>> +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c
>> @@ -312,6 +312,11 @@ static const struct zynqmp_disp_format avbuf_gfx_fmts[] = {
>>  		.buf_fmt	= ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_RGBA8888,
>>  		.swap		= true,
>>  		.sf		= scaling_factors_888,
>> +	}, {
>> +		.drm_fmt	= DRM_FORMAT_XRGB8888,
>> +		.buf_fmt	= ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_RGBA8888,
>> +		.swap		= true,
>> +		.sf		= scaling_factors_888,
>>  	}, {
>>  		.drm_fmt	= DRM_FORMAT_RGBA8888,
>>  		.buf_fmt	= ZYNQMP_DISP_AV_BUF_FMT_NL_GFX_ABGR8888,
> 
> Tested-by: Sean Anderson <sean.anderson at linux.dev>
> 
> I can confirm that this provides a nice performance boost :)

Actually, I think a better fix would be to make the "video" plane the
primary one. That plane supports XRGB8888 natively, and then the
graphics plane can be used as an overlay for e.g. windows or cursors.

--Sean