[RESEND] Re: [PATCH] PCI: dw-rockchip: Skip waiting for link up

[Niklas Cassel]

On Tue, Nov 11, 2025 at 11:17:23AM +0800, Shawn Lin wrote:
> > 
> > It works stably on the ROCK 5A. The link speed is 2Gb/s.
> > 
> > The ROCK 5C is unstable. It initially worked with a link speed of 4Gb/s,
> > but eventually started showing kernel oops. The dts files for the 5A and
> > 5C are compatible and interchangeable, but even using the 5A's dts on
> > the 5C, the operation remains unstable.
> 
> The link speed on ROCK 5A is 2Gb/s also means it's downgraded now. Did
> ROCK 5A work under the link speed of 4Gb/s before?
> 
> In case it's signal integrity relevant, you could enable PCIE_DW_DEBUGFS
> and refer to Documentation/ABI/testing/debugfs-dwc-pcie to collect
> RASDES info from there.

Just a quick note:
I've noticed that you cannot blindly look at the link speed in dmesg.

E.g. on my ROCK 5B boards, I can occasionally see something like:
[    1.417181] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link

However, if I check the actual link speed with lspci after boot:

# lspci -vvv  -s 0000:01:00.0 | grep LnkSta:
                LnkSta: Speed 8GT/s, Width x4

I can see that the link is actually using the correct speed + number of lanes.


Kind regards,
Niklas