[PATCH 3/9] arm64: dts: imx8mm-evk: add uart1 and bluetooth node

[Frank Li]

From: Sherry Sun <sherry.sun at nxp.com>

Add uart1 and bluetooth node.

Signed-off-by: Sherry Sun <sherry.sun at nxp.com>
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index ed8b38c6df3731d51bed42c8f68e7d4e0c2b1820..308e644d2af296ae88cbbe01e3bc59346b310f51 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -607,6 +607,19 @@ &spdif1 {
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
 &uart2 { /* console */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -789,6 +802,15 @@ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
 		>;
 	};
 
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140

-- 
2.34.1