[PATCH] pmdomain: mediatek: convert from clk round_rate() to determine_rate()

[Nicolas Frattaroli]

On Friday, 7 November 2025 00:40:43 Central European Standard Time Brian Masney wrote:
> The round_rate() clk ops is deprecated in the clk framework in favor
> of the determine_rate() clk ops, so let's convert this driver so that
> round_rate() can be removed from the clk core.
> 
> Signed-off-by: Brian Masney <bmasney at redhat.com>
> ---
>  drivers/pmdomain/mediatek/mtk-mfg-pmdomain.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pmdomain/mediatek/mtk-mfg-pmdomain.c b/drivers/pmdomain/mediatek/mtk-mfg-pmdomain.c
> index af20111067c02a5f9a0d6d751e9e0dc32c1a4d90..9bad577b3ae4bf1b83d4f782bb52f56f779a8974 100644
> --- a/drivers/pmdomain/mediatek/mtk-mfg-pmdomain.c
> +++ b/drivers/pmdomain/mediatek/mtk-mfg-pmdomain.c
> @@ -309,11 +309,11 @@ static unsigned long mtk_mfg_recalc_rate_gpu(struct clk_hw *hw,
>  	return readl(mfg->shared_mem + GF_REG_FREQ_OUT_GPU) * HZ_PER_KHZ;
>  }
>  
> -static long mtk_mfg_round_rate(struct clk_hw *hw, unsigned long rate,
> -			       unsigned long *parent_rate)
> +static int mtk_mfg_determine_rate(struct clk_hw *hw,
> +				  struct clk_rate_request *req)
>  {
>  	/*
> -	 * The round_rate callback needs to be implemented to avoid returning
> +	 * The determine_rate callback needs to be implemented to avoid returning
>  	 * the current clock frequency, rather than something even remotely
>  	 * close to the frequency that was asked for.
>  	 *
> @@ -325,7 +325,7 @@ static long mtk_mfg_round_rate(struct clk_hw *hw, unsigned long rate,
>  	 * high current frequency, breaking the powersave governor in the process.
>  	 */
>  
> -	return rate;
> +	return 0;
>  }
>  
>  static unsigned long mtk_mfg_recalc_rate_stack(struct clk_hw *hw,
> @@ -338,12 +338,12 @@ static unsigned long mtk_mfg_recalc_rate_stack(struct clk_hw *hw,
>  
>  static const struct clk_ops mtk_mfg_clk_gpu_ops = {
>  	.recalc_rate = mtk_mfg_recalc_rate_gpu,
> -	.round_rate = mtk_mfg_round_rate,
> +	.determine_rate = mtk_mfg_determine_rate,
>  };
>  
>  static const struct clk_ops mtk_mfg_clk_stack_ops = {
>  	.recalc_rate = mtk_mfg_recalc_rate_stack,
> -	.round_rate = mtk_mfg_round_rate,
> +	.determine_rate = mtk_mfg_determine_rate,
>  };
>  
>  static const struct clk_init_data mtk_mfg_clk_gpu_init = {
> 
> ---
> base-commit: df5d79720b152e7ff058f11ed7e88d5b5c8d2a0c
> change-id: 20251106-clk-pmdomain-mediatek-round-rate-649a9bf7d30a
> 
> Best regards,
> 

Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>

I didn't test boot this, but it should be fine, as I've checked
and all the places where the clk core checks for round_rate, it
also checks for determine_rate. So this is likely correct.

I've also made sure the adjusted op implementation is correct,
in that simply returning 0 leaves the requested rate as-is and
preserves the existing behaviour.

Kind regards,
Nicolas Frattaroli