[PATCH 1/2] dt-bindings: arm: fsl: add Skov Rev.C HDMI support

[Marco Felsch]

>From software perspective, Rev.C HDMI and Rev.B HDMI don't differ since
the panel is connected via HDMI and the touchscreen is connected via
USB. However, the bootloader firmware expects to find a dts with the
correct revc-hdmi compatible.

Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 00cdf490b0620bf537330ee9342a197f13c8c8ab..cf4405389f68ab96e9927bb61a05e57cf698b4f1 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1110,6 +1110,7 @@ properties:
               - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel
               - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel
               - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel
+              - skov,imx8mp-skov-revc-hdmi # SKOV i.MX8MP climate control without panel
               - skov,imx8mp-skov-revc-bd500 # SKOV i.MX8MP climate control with LED frontplate
               - skov,imx8mp-skov-revc-tian-g07017 # SKOV i.MX8MP climate control with 7" panel
               - ultratronik,imx8mp-ultra-mach-sbc # Ultratronik SBC i.MX8MP based board

-- 
2.47.3