[PATCH v2 4/5] dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
Christian Marangi
ansuelsmth at gmail.com
Thu Nov 6 15:57:07 PST 2025
Document Airoha AN7583 Pin Controller based on Airoha EN7581 with some
minor difference on some function group (PCM and LED gpio).
To not bloat the EN7581 schema with massive if condition, use a
dedicated YAML schema for Airoha AN7583.
Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
.../pinctrl/airoha,an7583-pinctrl.yaml | 402 ++++++++++++++++++
1 file changed, 402 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml
new file mode 100644
index 000000000000..79910214d9b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml
@@ -0,0 +1,402 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/airoha,an7583-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN7583 Pin Controller
+
+maintainers:
+ - Lorenzo Bianconi <lorenzo at kernel.org>
+
+description:
+ The Airoha's AN7583 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: airoha,an7583-pinctrl
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - interrupts
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupt-controller
+ - "#interrupt-cells"
+
+patternProperties:
+ '-pins$':
+ type: object
+
+ patternProperties:
+ '^mux(-|$)':
+ type: object
+
+ description:
+ pinmux configuration nodes.
+
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [pon, tod_1pps, sipo, mdio, uart, i2c, jtag, pcm, spi,
+ pcm_spi, i2s, emmc, pnand, pcie_reset, pwm, phy1_led0,
+ phy2_led0, phy3_led0, phy4_led0, phy1_led1, phy2_led1,
+ phy3_led1, phy4_led1]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: pon
+ then:
+ properties:
+ groups:
+ enum: [pon]
+ - if:
+ properties:
+ function:
+ const: tod_1pps
+ then:
+ properties:
+ groups:
+ enum: [pon_tod_1pps, gsw_tod_1pps]
+ - if:
+ properties:
+ function:
+ const: sipo
+ then:
+ properties:
+ groups:
+ enum: [sipo, sipo_rclk]
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ items:
+ enum: [uart2, uart2_cts_rts, hsuart, hsuart_cts_rts,
+ uart4, uart5]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c1]
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag_udi, jtag_dfd]
+ - if:
+ properties:
+ function:
+ const: pcm
+ then:
+ properties:
+ groups:
+ enum: [pcm1, pcm2]
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [spi_quad, spi_cs1]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: pcm_spi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [pcm_spi, pcm_spi_int, pcm_spi_rst, pcm_spi_cs1,
+ pcm_spi_cs2, pcm_spi_cs3, pcm_spi_cs4]
+ maxItems: 7
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2s]
+ - if:
+ properties:
+ function:
+ const: emmc
+ then:
+ properties:
+ groups:
+ enum: [emmc]
+ - if:
+ properties:
+ function:
+ const: pnand
+ then:
+ properties:
+ groups:
+ enum: [pnand]
+ - if:
+ properties:
+ function:
+ const: pcie_reset
+ then:
+ properties:
+ groups:
+ enum: [pcie_reset0, pcie_reset1]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6,
+ gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
+ gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
+ gpio26, gpio27, gpio28, gpio29, gpio30, gpio31,
+ gpio36, gpio37, gpio38, gpio39, gpio40, gpio41,
+ gpio42, gpio43, gpio44, gpio45, gpio46, gpio47]
+ - if:
+ properties:
+ function:
+ const: phy1_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio1, gpio2, gpio3, gpio4]
+ - if:
+ properties:
+ function:
+ const: phy2_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio1, gpio2, gpio3, gpio4]
+ - if:
+ properties:
+ function:
+ const: phy3_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio1, gpio2, gpio3, gpio4]
+ - if:
+ properties:
+ function:
+ const: phy4_led0
+ then:
+ properties:
+ groups:
+ enum: [gpio1, gpio2, gpio3, gpio4]
+ - if:
+ properties:
+ function:
+ const: phy1_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+ - if:
+ properties:
+ function:
+ const: phy2_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+ - if:
+ properties:
+ function:
+ const: phy3_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+ - if:
+ properties:
+ function:
+ const: phy4_led1
+ then:
+ properties:
+ groups:
+ enum: [gpio8, gpio9, gpio10, gpio11]
+
+ additionalProperties: false
+
+ '^conf(-|$)':
+ type: object
+
+ description:
+ pinconf configuration nodes.
+
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ An array of strings. Each string contains the name of a pin.
+ items:
+ enum: [uart1_txd, uart1_rxd, i2c_scl, i2c_sda, spi_cs0, spi_clk,
+ spi_mosi, spi_miso, gpio0, gpio1, gpio2, gpio3, gpio4,
+ gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12,
+ gpio13, gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
+ gpio27, gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
+ gpio34, gpio35, gpio36, gpio37, gpio38, gpio39, gpio40,
+ gpio41, gpio42, gpio43, gpio44, gpio45, gpio46,
+ pcie_reset0, pcie_reset1, pcie_reset2]
+ minItems: 1
+ maxItems: 58
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ drive-open-drain: true
+
+ drive-strength:
+ description:
+ Selects the drive strength for MIO pins, in mA.
+ enum: [2, 4, 6, 8]
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl {
+ compatible = "airoha,an7583-pinctrl";
+
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pcie1-rst-pins {
+ conf {
+ pins = "pcie_reset1";
+ drive-open-drain = <1>;
+ };
+ };
+
+ pwm-pins {
+ mux {
+ function = "pwm";
+ groups = "gpio18";
+ };
+ };
+
+ spi-pins {
+ mux {
+ function = "spi";
+ groups = "spi_quad", "spi_cs1";
+ };
+ };
+
+ uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2", "uart2_cts_rts";
+ };
+ };
+
+ uar5-pins {
+ mux {
+ function = "uart";
+ groups = "uart5";
+ };
+ };
+
+ mmc-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+ };
+
+ mdio-pins {
+ mux {
+ function = "mdio";
+ groups = "mdio";
+ };
+
+ conf {
+ pins = "gpio2";
+ output-enable;
+ };
+ };
+ };
--
2.51.0
More information about the linux-arm-kernel
mailing list