[PATCH net-next v2 03/11] net: stmmac: ingenic: use PHY_INTF_SEL_xxx to select PHY interface

[Maxime Chevallier]

On 06/11/2025 09:57, Russell King (Oracle) wrote:
> Use the common dwmac definitions for the PHY interface selection field.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>

Reviewed-by: Maxime Chevallier <maxime.chevallier at bootlin.com>

Maxime

> ---
>  drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
> index c6c82f277f62..5de2bd984d34 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
> @@ -35,10 +35,10 @@
>  #define MACPHYC_RX_DELAY_MASK		GENMASK(10, 4)
>  #define MACPHYC_SOFT_RST_MASK		GENMASK(3, 3)
>  #define MACPHYC_PHY_INFT_MASK		GENMASK(2, 0)
> -#define MACPHYC_PHY_INFT_RMII		0x4
> -#define MACPHYC_PHY_INFT_RGMII		0x1
> -#define MACPHYC_PHY_INFT_GMII		0x0
> -#define MACPHYC_PHY_INFT_MII		0x0
> +#define MACPHYC_PHY_INFT_RMII		PHY_INTF_SEL_RMII
> +#define MACPHYC_PHY_INFT_RGMII		PHY_INTF_SEL_RGMII
> +#define MACPHYC_PHY_INFT_GMII		PHY_INTF_SEL_GMII_MII
> +#define MACPHYC_PHY_INFT_MII		PHY_INTF_SEL_GMII_MII
>  
>  #define MACPHYC_TX_DELAY_PS_MAX		2496
>  #define MACPHYC_TX_DELAY_PS_MIN		20