[PATCH v4 0/3] add sysfs nodes to configure TPDA's registers
Jie Gan
jie.gan at oss.qualcomm.com
Wed Nov 5 21:21:04 PST 2025
On 10/28/2025 10:02 AM, Jie Gan wrote:
> Patchset 1 introduces configuration of the cross-trigger registers with
> appropriate values to enable proper generation of cross-trigger packets.
>
> Patchset 2 introduces a logic to configure the TPDA_SYNCR register,
> which determines the frequency of ASYNC packet generation. These packets
> assist userspace tools in accurately identifying each valid packet.
>
> Patchset 3 introduces a sysfs node to initiate a flush request for the
> specific port, forcing the data to synchronize and be transmitted to the
> sink device.
>
Gentle reminder.
> Changes in V4:
> 1. Document sysfs nodes with correct kernel version and date.
> Link to V3 - https://lore.kernel.org/linux-arm-kernel/20250827105545.7140-1-jie.gan@oss.qualcomm.com/
>
> Changes in V3:
> 1. Optimizing codes according to James's comment.
> Link to V2 - https://lore.kernel.org/all/20250827042042.6786-1-jie.gan@oss.qualcomm.com/
>
> Changes in V2:
> 1. Refactoring the code based on James's comment for optimization.
> Link to V1 - https://lore.kernel.org/all/20250826070150.5603-1-jie.gan@oss.qualcomm.com/
>
> Signed-off-by: Jie Gan <jie.gan at oss.qualcomm.com>
> ---
> Tao Zhang (3):
> coresight: tpda: add sysfs nodes for tpda cross-trigger configuration
> coresight: tpda: add logic to configure TPDA_SYNCR register
> coresight: tpda: add sysfs node to flush specific port
>
> .../ABI/testing/sysfs-bus-coresight-devices-tpda | 50 ++++
> drivers/hwtracing/coresight/coresight-tpda.c | 278 +++++++++++++++++++++
> drivers/hwtracing/coresight/coresight-tpda.h | 33 ++-
> 3 files changed, 360 insertions(+), 1 deletion(-)
> ---
> base-commit: 8fec172c82c2b5f6f8e47ab837c1dc91ee3d1b87
> change-id: 20251028-configure_tpda_reg-f3396f97f9a1
>
> Best regards,
More information about the linux-arm-kernel
mailing list